TC124-FR-0778R7L

Number of Pins:	8
Height - Seated (Max):	0.020" (0.50mm)
Size / Dimension:	0.079" L x 0.039" W (2.00mm x 1.00mm)
Supplier Device Package:	--
Package / Case:	0804, Concave, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	DDRAM, SDRAM
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	TC124
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±1%
Resistance (Ohms):	78.7
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

！

Introduction

Resistor Networks, Arrays including, TC124-FR-0778R7L are devices connected into networks to form resistive circuits for electrical and electronic applications. The types of resistor networks, arrays and the circuits they are used for are varied, however their function is constant - to control or limit the flow of electricity. The TC124-FR-0778R7L is a robustly constructed resistor network specifically designed for industrial applications such as power supply, amplifiers and other power circuits.

Application Field

Resistor networks and arrays are used in broad range of electrical equipment where small, precise resistances need to be measured with accuracy. There are numerous applications where the TC124-FR-0778R7L is best suited. The TC124-FR-0778R7L is used to reduce power supply fluctuations, as it can adjust the voltage that goes through a component. This is especially useful for high voltage applications, for example, in any industrial-type machinery. Another purpose of the TC124-FR-0778R7L is to create output filters that can help reduce radio frequency interference from equipment to other components.The TC124-FR-0778R7L can also be used to supply an adjustable voltage, rather than a constant voltage, which can be useful in power supplies and other electrical applications. They can also be used to control the input or output voltage in electronic circuits, as well as to measure current or voltage.

Working Principle

TC124-FR-0778R7L is constructed from a network of resistors which allow for a smooth balance of voltage, in comparison to just using a single resistor. It is designed to connect an input voltage to an output voltage, thus controlling the amount of current that can flow.The way the TC124-FR-0778R7L works is by connecting two separate nodes: an input node and an output node. In a basic network, the input node is where the source of current or voltage is connected, and the output node is where the current exits the network. At the input node, the amount of current and the voltage is determined in a precise manner. This current then passes through the network to the output node and this depends on the values of the resistors in the network. At the output node, the current is regulated and the voltage remains steady.

Conclusion

In conclusion, TC124-FR-0778R7L is a type of resistor network that is used for a variety of industrial applications. It is constructed from a network of resistors, which allows for a smooth balance of voltage compared to single resistors. The network is connected to both the input and output nodes, with the source of current or voltage at the input node and the current exiting the network at the output node. By using the resistance values of the resistors, the current can be regulated and the voltage can be kept steady.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description