TC164-FR-0731R6L

Number of Pins:	8
Height - Seated (Max):	0.028" (0.70mm)
Size / Dimension:	0.126" L x 0.063" W (3.20mm x 1.60mm)
Supplier Device Package:	--
Package / Case:	1206 (3216 Metric), Concave, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	DDRAM, SDRAM
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	TC164
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±1%
Resistance (Ohms):	31.6
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

A resistor network, or array, is an electronic component composed of resistors. It is designed for use in electrical and electronic applications where one or more resistors need to be connected in series, parallel, or combinations of both. The most common application for resistor networks is in audio and power circuits, where they are used to provide a degree of protection for other components.The TC164-FR-0731R6L is a very popular resistor network. It is a 6-pin DIP (Dual In-line Package) arrangement configured in a 24-Volt, 6-ohm resistor network. This network contains two resistors: a 2.2-ohm, and a 4.7-ohm resistor. The resistors are in a parallel configuration, providing resistance of both the resistors down the line. The TC164-FR-0731R6L is a current limiting device, which means it is used to limit the amount of current going through a circuit.The TC164-FR-0731R6L has a wide range of applications. It is most commonly found in audio systems, as it can be used to reduce the signal loss caused by long speaker wires. It can also be used in power circuits, where it acts as a current limiting device. In automotive applications, it can be used in combination with other components to create a more reliable power circuit.The TC164-FR-0731R6L works by providing a voltage drop across both resistors. As the voltage increases, the current through the circuit increases at a rate that is determined by the resistance of the two resistors. This allows the current limit to be adjusted by changing the resistance of the resistors.When it comes to installing the TC164-FR-0731R6L, it is important to follow the installation instructions provided by the manufacturer. To do this, the positive and negative leads must first be connected to the circuit. Then the resistors need to be connected in series with one of the two resistors being the most remote from the negative lead. This is done to ensure that voltage drop is spread equally across both resistors.Once the installation is complete, the initial current limit set by the network can be verified. This can be done by measuring the voltage across the network, with a multimeter, or by monitoring the current with an oscilloscope. If all is correct, the current limit set by the network will be correct.In addition to providing a current limiting function, the TC164-FR-0731R6L can also provide a degree of protection for other components in the circuit. This is because of the evenly dispersed voltage drop across both resistors, which helps prevent the excessive current from damaging other components. It also helps to protect against voltage spikes, which are a common occurrence in many circuits.The TC164-FR-0731R6L is a highly reliable and cost-effective solution for protecting other components in an electrical or electronic circuit. It is also very easy to install and use. With the right precautions, the TC164-FR-0731R6L can help ensure maximum performance and reliability from any given circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description