TC164-JR-0718KL Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, encompass a wide range of passive electronic components which have properties that enable them to serve as either voltage dividers, signal attenuators, noise filters, adjustable biasing/equalizing elements, or programmable logic components.

The TC164-JR-0718KL is a type of resistor network which follows a three-terminal configuration. Resistor networks are typically composed of three layers of resistors: namely, signal layer, base layer, and amplification layer. Each of these layers contain a set of resistors which are interconnected; with the last layer being connected in parallel, in combination with the base layer. This creates a Network which provides a greater degree of control and complexity when compared to a single resistor device.

The TC164-JR-0718KL is composed of eighteen resistors, divided into three layers. The signal layer contains four resistors, the base layer contains four resistors, and the amplification layer contains ten resistors. As the device is a three-terminal configuration, the three layers will also have three leads - a Ground lead, a Signal lead, and a Control lead.

The TC164-JR-0718KL is primarily used in the field of Audio Signal Processing (ASP). Due to its three-layer, three-terminal configuration, the device is able to serve multiple purposes in the audio space. For example, one application for this type of Network is in a Baxandall Volumetric Equalizer. In this type of device, the Network enables engineers to attenuate signals selectively (as suits their desires) without changing the waveform of the source signal, resulting in a higher fidelity volume control than is achievable with conventional methods. The TC164-JR-0718KL is also suitable for use in guitar amplifiers, bass amplifiers, and other audio component designs.

The TC164-JR-0718KL resistor network consitutes the core of the working principle upon which most Audio Signal Processing devices are based. As the Network has a three-leaf configuration, it can act as a voltage divider, which means that it can modify input signals to create new ones with an altered magnitude. This can be used to modify bass and treble frequencies, or to adjust the ratio of direct signal to feedback signal from a guitar amplifier.

The Network can also be used for more complex tasks such as emulating the frequency response of vintage amplifiers, creating pre-gain boosts, treble boosts, bass boosts, or even to emulate a parametric equalizer. The Network can also be used in conjunction with additional analog circuits to form complex signal processing systems. It allows engineers to customize signal responses, and create soundscapes that are tailored to specific requirements.

The TC164-JR-0718KL Resistor Network is an effective, commercially available solution for achieving a variety of complex Audio Signal Processing tasks. Its three-terminal configuration enables engineers to attenuate signals selectively without changing the waveform of the source material, providing greater fidelity than what is achievable with conventional methods. Furthermore, its versatility makes it suitable for use in a variety of applications such as guitar amplifiers, bass amplifiers, and other audio components.

The specific data is subject to PDF, and the above content is for reference