TC7WH125FK,LJ(CT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic- Buffers, Drivers, Receivers, Transceivers are the building blocks of logic designs. Accordingly, it is important to understand the basics of the various building blocks and their applications. This article will discuss the application field and working principle of TC7WH125FK,LJ.

TC7WH125FK,LJ is logic-level buffer, which is a type of logic circuit used for translating between two different logic levels. A buffer is a static device, meaning that it does not require any clock or other external control signals and operates passively with no change in its state. Its main purpose is to act as a conduit between two circuits, ensuring that the voltage levels between them are within the acceptable range, so that data is transmitted without error.

Technically speaking, TC7WH125FK,LJ is a digital logic device designed to convert between two different logic levels or between two different logic families. It is an open-collector-type buffer, meaning it has no internal pull-up resistors, but requires an external pull-up resistor. The device has three digital inputs and one digital output. The output is defined as active low, meaning it will go low or very close to ground voltage when any of the inputs is high.

The principal application of TC7WH125FK,LJ is to act a level converter between two digital circuits that have different voltages levels. It is sometimes used to bridge gaps between two different logic families such. For example, it can be used to bridge the gap between TTL and CMOS levels. The device is also suitable for use as a line driver in logic circuits as it can drive long lines with different logic families.

The working principle of TC7WH125FK,LJ is based on open-collector logic. In open-collector logic, the output is connected to ground through an open connection. When one of the inputs is high, the output is pulled low and thus defines the active-low state. When all the inputs are low, the output is left open, which defines the high-impedance state.

In order to use TC7WH125FK,LJ, an external pull-up must be provided. This pull-up connects the output to the power supply voltage and should be designed properly to ensure correct operation. The pull-up should be selected depending on the logic family that is being used. For TTL logic, pull-ups with a resistance values of between 2.2K to 10K are typical, while for CMOS, larger pull-up resistors between 10K to 100K are recommended.

In summary, TC7WH125FK,LJ is a logic-level buffer that is used for translating between two different logic levels or levels from two different logic families. It can be used to bridge the gap between TTL and CMOS logic as well as driving lines in logic circuits. An external pull-up resistor must be used in order for it to operate correctly.

The specific data is subject to PDF, and the above content is for reference