Allicdata Part #: | 1951-1069-ND |
Manufacturer Part#: |
TCK-047 |
Price: | $ 2.74 |
Product Category: | Filters |
Manufacturer: | Traco Power North America |
Short Description: | PRODUCT TYPE: EMC CHOKES; PACKAG |
More Detail: | 10µH @ 1kHz 2 Line Common Mode Choke Surface Mount... |
DataSheet: | TCK-047 Datasheet/PDF |
Quantity: | 100 |
1 +: | $ 2.49480 |
10 +: | $ 2.28690 |
25 +: | $ 2.07900 |
50 +: | $ 1.74636 |
100 +: | $ 1.49688 |
2500 +: | $ 1.20582 |
Series: | -- |
Part Status: | Active |
Filter Type: | -- |
Number of Lines: | 2 |
Inductance @ Frequency: | 10µH @ 1kHz |
DC Resistance (DCR) (Max): | 100 mOhm |
Voltage Rating - DC: | -- |
Voltage Rating - AC: | -- |
Operating Temperature: | -- |
Ratings: | -- |
Approvals: | -- |
Features: | -- |
Mounting Type: | Surface Mount |
Size / Dimension: | 0.228" L x 0.205" W (5.80mm x 5.20mm) |
Height (Max): | 0.191" (4.85mm) |
Package / Case: | Nonstandard |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common mode chokes are passive electronic components that are used to remove and reduce common mode noise from a signal. The primary application of common mode chokes is in industrial electronic controls and communication systems, where common mode noise can cause malfunctions and affect the reliability of the system. The TCK-047 is a common mode choke that has been designed specifically to improve the signal quality and reduce the common mode noise caused by power lines, radio and satellite transmissions, and other devices that can create common mode interference.
The TCK-047 is a three-wire, azimuthally isolated common mode choke that is designed to provide effective filtering of common mode current on power lines. The three wires are designed to be a shield, the core of the choke, and the frequency dependent dielectric material. The shield wire, when connected to the signal return path ground, creates a high resistance to the flow of common mode current, thus reducing the common mode current signal. The core of the choke increases inductance and provides additional protection against interference.
The frequency dependent dielectric material is the key element of the TCK-047, as it provides further filtering by providing a path for the common mode current to flow around the core of the choke instead of through it. This method of filtering allows the device to effectively reduce common mode current while still providing a low-loss signal path. The TCK-047 also has two built-in capacitors to reduce EMI/RFI noise, increasing the overall performance of the device.
The TCK-047 is designed for use in a variety of applications, from single and three-phase power lines to radio and satellite transmissions. It can be used to reduce common mode current in short distances, like in industrial applications, or over longer distances, like satellite transmission. It is also ideal for shielding boards, enclosures, and wires from EMI and RFI. The TCK-047 is an effective device for common mode noise reduction in a variety of applications, from consumer electronics to industrial control systems.
In conclusion, the TCK-047 is a common mode choke that has been specifically designed for use in applications requiring effective filtering of common mode current. It features the three-wire azimuthally isolated design, a frequency dependent dielectric material to reduce common mode current, and two built-in capacitors to reduce EMI/RFI noise. The TCK-047 is an effective device for common mode noise reduction and is suitable for a variety of applications, from consumer electronics to industrial control systems.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...