Allicdata Part #: | 1121-1418-ND |
Manufacturer Part#: |
TCM-RF-REMOTE |
Price: | $ 8.19 |
Product Category: | RF/IF and RFID |
Manufacturer: | Thomas Research Products |
Short Description: | RF WIRELESS CORDLESS REMOTE |
More Detail: | RF Wireless Lighting Controller 2.4GHz ZigBee™ |
DataSheet: | TCM-RF-REMOTE Datasheet/PDF |
Quantity: | 19 |
1 +: | $ 7.44660 |
10 +: | $ 7.13034 |
25 +: | $ 5.54551 |
100 +: | $ 4.75335 |
250 +: | $ 4.51569 |
500 +: | $ 4.27802 |
1000 +: | $ 4.04034 |
Series: | -- |
Part Status: | Active |
Function: | Wireless Lighting Controller |
Modulation or Protocol: | ZigBee™ |
Frequency: | 2.4GHz |
Applications: | General Purpose |
Interface: | -- |
Sensitivity: | -- |
Power - Output: | 6dBm |
Data Rate (Max): | -- |
Features: | -- |
Voltage - Supply: | 100 V ~ 277 V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF receiver, transmitter, and transceiver finished units consist of three distinct units that are used to facilitate wireless communication. The TCM-RF-REMOTE application field and working principle are particularly well suited for wireless communication because it is better able to divide and manage channels of communication.
TCM-RF-REMOTE uses a radio transmitter and receiver, in combination with a microcontroller and battery, to enable wireless communication at distances of up to 2.4km. The device is powered by a small-sized battery that is connected to a microcontroller that is in turn connected to a radio module. The microcontroller stores and manages the configuration settings, and also is responsible for sending out the encoded signal using radio technology.
When the device is activated, the radio transmitter module is the first to receive the data from the microcontroller. The RF signal is then transmitted to the receiver units and is decoded by the microcontroller. The receiver then processes the data and the result is transferred to the software or application. The receiver unit can also be used to remote control the device.
Furthermore, the microcontroller can also be used to determine the strength of the signal being received and transmit it back to the transmitter. This is normally achieved by measuring the signal-to-noise ratio and then recalculating the output.
The production of TCM-RF-REMOTE can be divided into three steps which include the manufacturing of the components, assembly and testing. The components are manufactured according to the desired specifications of the customer and then soldered onto a single board. Next, the components are connected to each other to form the transceiver.
After the transceivers have been manufactured, the modules are tested for communication and wireless range. Once they have completed testing, the modules are finally assembled into a single unit that can be installed in an electrical appliance.
In conclusion, the TCM-RF-REMOTE application field and working principle is a particularly advanced form of wireless communication. It is able to handle the transmission and reception of digital signals efficiently and accurately at distances of up to 2.4km. The different components of the unit have all gone through testing and assembly and the end result is a highly reliable communication tool.
The specific data is subject to PDF, and the above content is for reference
EV-DO USB CELLULAR MODEM AERISRF Transce...
9XSTREAM 100MW RS232/485 9600BPSRF Trans...
MODEM CDMA US BUNDLE IPRF Transceiver, C...
MODEM RF 900MHZ RS232/485 W/ACCRF Transc...
EASYRADIO 433MHZ USB TRANSMITTERRF Trans...
RF TRANSCEIVER 2.4GHZ KEYFOBRF Transmitt...