TCSD-04-D-15.15-01-N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Cable Assemblies

TCHD-04-D-15.15-01-N is a rectangular cable assembly that is widely used in a variety of applications. It is usually used in electrical/electronic power applications, audio and communication systems, consumer electronics, automotive and military applications. This cable assembly is designed to provide a reliable solution for data, power, and signal connections between components.

It utilizes a full range of wires in various sizes and insulation materials as well as strain reliefs, strain reliefs and pins that defy the elements and create a safe environment for the transmission and signal. With its construction and design, this cable assembly meets various standards and requirements such as UL, TIA/EIA and CSA.

The primary function of this cable assembly is to ensure electrical continuity through two conductive paths of different lengths and thickness. This path is usually configured in two parts, one part of which is the sheath and the other is the wire. The wire is then connected to a terminal which has a much higher resistance than the sheath. This allows the electric current to travel in both directions, reducing resistance and increasing energy efficiency.

The actual length and diameter of the wire used will depend on the application in which it is being used. The wire needs to be able to withstand the operating environment as well as the mechanical stresses encountered during installation and operation. The sheath is designed to protect the wire and should be chosen based on its environmental resistance and mechanical flexibility.

The various components which make up a TCHD-04-D-15.15-01-N assembly are connected via solder, crimping or press fitting. Each connection must be waterproof in order to prevent any electrical issues when the assembly is exposed to water. The assembly is insulated by a jacket made of polyurethane or silicone. This provides protection against any dirt ingress and also provides additional protection against any physical damage.

The other component used in this cable assembly is the terminal. This is used to transfer and transmit signals from one end of the cable to the other. The terminal is usually a single, flat or block terminal and is usually made from copper or nickel plated brass. The main reason for using a terminal is to provide a reliable connection that is not affected by vibrations or temperature changes.

The TCHD-04-D-15.15-01-N assembly is extremely reliable due to the fact that it is designed to meet stringent standards such as UL, TIA/EIA and CSA. It is also designed to provide efficient power transfer with a minimal amount of electrical resistance. This makes it ideal for applications in the automotive and consumer electronics sectors.

The specific data is subject to PDF, and the above content is for reference