TD-100.000MCD-T

Series:	TD
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Base Resonator:	MEMS
Type:	XO (Standard)
Frequency:	100MHz
Function:	Enable/Disable
Output:	CMOS
Voltage - Supply:	2.5V
Frequency Stability:	±25ppm
Operating Temperature:	-40°C ~ 85°C
Current - Supply (Max):	--
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Height - Seated (Max):	0.032" (0.80mm)
Current - Supply (Disable) (Max):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: TD-100.000MCD-T Application Field and Working Principle

Introduction

Oscillators are components used to generate periodic electrical signals, typically square waves, sine waves, and triangular waves. They are fundamental parts in many electronic systems and can readily be found in oscilloscope, radio, and many other electrical electronics systems. TD-100.000MCD-T is a type of oscillator manufactured by Sanyo Semiconductor Co., Ltd. The oscillator is equipped with an oscillation circuit that uses a two resistors to control the oscillation frequency. In this article, we will discuss the application field and working principle of TD-100.000MCD-T oscillator.

Application Field

TD-100.000MCD-T oscillator is mainly used for device control, which includes temperature control, pressure regulation, and motor speed control. TD-100.000MCD-T oscillator is also used in industrial equipment such as industrial robots, automation systems, and data processing systems. Moreover, TD-100.000MCD-T oscillator is suitable for consumer electronic products such as portable audio players, digital cameras, and PDAs. TD-100.000MCD-T oscillator is also suitable for automotive applications such as vehicle immobilizers, audio systems, and navigation systems.

Working Principle

The TD-100.000MCD-T oscillator uses two resistors to control the oscillation frequency. One resistor is connected to ground, and the other is connected to a variable voltage supply. Voltage is applied to the variable resistor, and when this voltage reaches a certain value, it provides a feedback loop that initiates an oscillating signal. This signal is then amplified by an amplifier and fed back into the circuit. The amplitude of the oscillating signal is then increased due to the positive feedback effect. This signal is then applied to a transistor, which is then used to drive the output of the oscillator.

Features

TD-100.000MCD-T oscillator comes with many features that make it a better choice for many applications. It has low current consumption, low noise, and low temperature coefficient. It also has various output waveform capabilities including square wave, sine wave, and triangular wave. Additionally, the oscillator has third harmonic distortion as low as -5dBc, and it can be used in both continuous and pulsed conditions.

Conclusion

TD-100.000MCD-T oscillator is an integrated oscillator that is used in various electronic systems. Its application field includes consumer electronic products, automotive applications, and industrial equipment. The oscillator works by using two resistors to provide a feedback loop to initiate a oscillating signal which is then amplified and fed back into the circuit. The oscillator has low noise and low current consumption with various output waveforms and low distortion. Through this article, we have discussed the application field and working principle of TD-100.000MCD-T oscillator.

The specific data is subject to PDF, and the above content is for reference