TD-100 Sensors, Transducers |
|
Allicdata Part #: | 302-1392-ND |
Manufacturer Part#: |
TD-100 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | E-T-A |
Short Description: | SENSOR CURRENT SWITCH 100A DC |
More Detail: | Current Sensor 100A 1 Channel Current Switch Unidi... |
DataSheet: | TD-100 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Frequency: | -- |
Package / Case: | Nonstandard |
Mounting Type: | Through Hole |
Polarization: | Unidirectional |
Operating Temperature: | -40°C ~ 125°C |
Current - Supply (Max): | 10mA |
Response Time: | 1µs |
Voltage - Supply: | 3.8 V ~ 24 V |
Accuracy: | -- |
Linearity: | -- |
Series: | TD |
Sensitivity: | -- |
Output: | Open Collector |
Number of Channels: | 1 |
Current - Sensing: | 100A |
Sensor Type: | Current Switch |
For Measuring: | DC |
Part Status: | Obsolete |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.The TD-100 is a current transducer, designed for the purpose of efficiently converting electrical current into proportional output values, allowing for much easier and more accurate current measurements to take place. This transducer is composed of a series of components, all of which work together to allow the transducer to accurately measure and convert current values.
The TD-100 is composed of two primary elements - the primary winding, which forms the basis for the magnetic field created by current flow in the circuit, and the secondary winding, which produces a proportional output voltage in response to the primary winding\'s magnetic field. Both these windings are typically built into a shielded, epoxy-coated case and can come in varying sizes and current ratings, depending on the application.
The primary winding is connected directly to the circuit that is being monitored, and as current flows through the circuit, it generates a magnetic field. This magnetic field is then intercepted by the secondary winding, causing it to produce an AC voltage that is proportional to the magnitude of current flow in the circuit. This output voltage, known as the primary output voltage, can then be used to calculate the actual current flow in the circuit.
The primary output voltage produced by the TD-100 is then converted into a digital format by a built-in ADC (Analog to Digital Converter). This digital data is then analyzed by a DSP (Digital Signal Processor), which serves to filter out any noise and spurious signals that may be present in the signal. Finally, the digital data is converted back into a current-measuring output, which is displayed in the form of a current range expressed in mA or A.
The TD-100 has a variety of applications, including testing the electrical characteristics of a circuit, measuring changes in current flow due to changes in temperature, or acting as a protective device in case of electrical overload. It can also be used for current metering, troubleshooting electrical systems, or even as an industrial-grade current monitoring system.
The TD-100 current transducer is a key component in any current monitoring system, providing users with much greater accuracy than any manual current measurement method. It is also relatively low-cost, compared to other current transducers. With its numerous applications, ease of use, and accuracy in measuring current, the TD-100 is one of the most essential pieces of equipment for any laboratory or production environment that needs to measure and monitor current flow.
The specific data is subject to PDF, and the above content is for reference
SENSOR CURRENT XFMR 40A ACCurrent Sensor...
SENSOR CURRENT XFMR 5A ACCurrent Sensor ...
SENSOR CURRENT HALL 15A AC/DCCurrent Sen...
3 PIECE KIT SENSOR CURRENT HALLCurrent S...
PACT RCP-4000A-1A-D190Current Sensor 100...
SENSOR CURRENT HALL 30A DCCurrent Sensor...