TDA7110XUMA1 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transmitters are types of communications equipment that are used to transmit (transmitters) and receive (receivers) radio waves. The type of transmitter used depends on the application and the range of data that it is able to transfer. One of the popular types of RF Transmitters is the TDA7110XUMA1. This article looks at the application field and working principle of the TDA7110XUMA1.

The TDA7110XUMA1 is a monolithic CMOS integrated circuit with a direct sequence spread spectrum (DSSS) transmitter. It is ideal for use in short-range radio frequency applications, such as remote control, domestic and commercial alarm systems, and wireless audio/video transmission systems. It is also used for wireless data transmission systems in industrial automation and in telemetry.

The operation of the TDA7110XUMA1 is based on frequency-hopping spread-spectrum (FHSS) with a transmission rate of up to 565 Kbps. FHSS works by continuously changing the frequency of the transmitted signal, as opposed to direct-sequence spread-spectrum in which the whole signal is transmitted at one frequency. By changing the frequency constantly, the signal is less likely to be subjected to interference from other sources. This is a more secure way of transmitting data over radio frequency, as it makes it harder for unwanted parties to eavesdrop on the data.

The TDA7110XUMA1 transmitter chip is capable of transmitting at a sampling rate of up to 16.5 MHz, with 16-bit resolution. It is also capable of modulating GMSK, MFSK, BPSK, BFSK and TCM. These modulation types are used to encode digital data onto radio waves, making it possible to transmit a variety of different types of data over the airwaves.

The TDA7110XUMA1 is designed to run on supply voltages of 1.8 - 3.3V, making it suitable for a wide range of applications. The device is also very low power, drawing just 25mA, which makes it ideal for portable and battery-operated applications. The device also has a low-noise power amplifier, allowing it to transmit a stronger signal at a longer range. The power amplifier also ensures that the transmitted signal is clean, with reduced interference when compared to legacy RF Transmitters.

The TDA7110XUMA1 has both a transmit and a receive pin. This allows it to be used in duplex communication systems, where both the transmitter and receiver can transmit and receive data at the same time. This allows for higher data rates, as well as more secure data transmission.

The TDA7110XUMA1 is capable of a wide range of applications, from wireless audio and video transmission to domestic and commercial alarm systems. It is a powerful and reliable RF Transmitter that is ideal for a variety of applications. It is low-power, low-noise, and has a wide range of modulation types, allowing it to be used for a variety of applications.

The specific data is subject to PDF, and the above content is for reference