TE2000B330RJ

Operating Temperature:	-25°C ~ 225°C
Failure Rate:	--
Package / Case:	Radial, Tubular
Lead Style:	Solder Lugs
Height - Seated (Max):	--
Size / Dimension:	2.362" Dia x 20.079" L (60.00mm x 510.00mm)
Mounting Feature:	Brackets
Coating, Housing Type:	Silicone Coated
Features:	Flame Proof, Safety
Series:	TE, CGS
Temperature Coefficient:	±440ppm/°C
Composition:	Wirewound
Power (Watts):	2000W
Tolerance:	±5%
Resistance:	330 Ohms
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount Resistors

Chassis mount resistors are resistors that are chassis-mounted, rather than surface-mount, in electronic equipment applications. They are typically fast-acting, heat-generating resistors that are usually used in power control applications.The TE2000B330RJ is a typical example of a chassis mount resistor used in power control applications. This resistor is a type of radial legged, wire wound resistor that is designed to allow the user to adjust resistance values quickly and easily. The TE2000B330RJ resistor is rated for a maximum current of 2 amperes, a temperature range of -65 to +200 degrees Celsius and a tolerance of 5%.The TE2000B330RJ resistor can be used for protection applications, as well as in high-power switching applications. In protection applications, the resistor acts as a current limiter to protect the components in the circuit from excessive heat or voltage. In high-power switching applications, the resistor is usually used to control the turn-on and turn-off times of loads, such as motors or transformers. The TE2000B330RJ resistor is constructed using a combination of carbon composition resistors and thick wire-wound resistors. The carbon composition resistors are designed to have low power dissipation and a reliable temperature co-efficient, while the thick wire-wound resistors provide high power dissipation and better temperature stability. Furthermore, the thick wire-wound resistors allow for a higher wattage operation without having to increase the size of the resistor.In terms of operating principle, the TE2000B330RJ resistor is based on Ohm\'s law, which states that the voltage across a resistor is directly proportional to the current passing through it. As the current passes through the resistor, it causes a small voltage drop across it. This voltage drop is what allows the user to adjust the resistance value.To adjust the resistance value, the user should connect the resistor to a variable voltage source. By increasing or decreasing the voltage across the resistor, the user can adjust the resistance value accordingly. The resistance value of the resistor is also affected by changes in the temperature near the resistor. As such, it is important to ensure that the surroundings of the resistor stay within the rated temperature range.In conclusion, the TE2000B330RJ resistor is an ideal solution for both protection and high-power switching applications. It is rated for a maximum current of 2 amperes, a temperature range of -65 to +200 degrees Celsius, and a tolerance of 5%. Furthermore, it has a low power dissipation and reliable temperature co-efficient. Finally, its operating principle is based on Ohm\'s law, allowing the user to easily adjust the resistance value.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description