TEL 10-4810WI

Current - Output (Max):	2.7A
Supplier Device Package:	--
Size / Dimension:	0.94" L x 0.54" W x 0.31" H (23.8mm x 13.7mm x 8.0mm)
Package / Case:	16-DIP Module, 6 Leads
Mounting Type:	Through Hole
Efficiency:	80%
Operating Temperature:	-40°C ~ 80°C (With Derating)
Features:	SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1.5kV
Power (Watts):	8.9W
Series:	TEL 10WI
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	3.3V
Voltage - Input (Max):	75V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC ConvertersDC-to-DC converters are units that convert direct current power from one voltage to another. The most common form of DC-to-DC converters are switching or continuous type converters. Similarly, the TEL 10-4810WI is a DC-to-DC converter that has an externally adjustable input voltage and can provide regulated output voltage from 0 to 40 V. It also comes with an adjustable output current. The primary application of the TEL 10-4810WI is to provide power to various kinds of circuits that use DC power. It can replace power supplies that require significant tuning or meticulous calibration. The TEL 10-4810WI can provide regulated DC power to a wide variety of circuits, including those used in control systems, robots, data communication and industrial equipment.The TEL 10-4810WI is powered by a wide input range from 8 to 40V DC. It can provide regulated output voltage of up to single or dual outputs at 0 to 40V and a current limit of 0.5 to 10A. The output voltage is adjustable from 0.8 to 40V using the three-point adjustment screw. The tolerance of the output voltage can be ±0.2V.The TEL 10-4810WI is also designed with a current limit circuit. This circuit will prevent the output from going higher than the set limit. The current limit is adjustable from 0.5 to 10A using the two-point adjustment screw. The output also has thermal protection with an external alarm and tripping system to protect the unit from overloading or overheating.The TEL 10-4810WI is a DC-to-DC converter that utilizes a basic switch-mode design. The converter consists of a high frequency transformer, rectifier circuits, and switching elements (MOSFETs). The high frequency transformer is used to step-up or step-down the voltage depending on the input and output requirements.When the MOSFET is switched on, current starts flowing from the rectifier into the primary winding of the transformer, transferring power through a process called "magnetic coupling" to the secondary winding. This secondary winding is then rectified, and the energy is stored in a capacitor.The capacitor then supplies the DC power output with a regulated voltage at the desired current. A feedback loop measures the output voltage and adjusts the switching frequency to maintain the output voltage regulation. The switching frequency is usually around 100kHz, which decreases the transformer size significantly.Overall, the TEL 10-4810WI is an effective DC-to-DC converter with adjustable input voltage and current limit. It can provide stable and regulated DC power in a wide range of applications. Its switch mode-design helps reduce transformer size and eliminate the need for manual tuning or calibration.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description