TEP 160-4816

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters, such as TEP 160-4816, are designed to transform an input DC voltage into a different output voltage, typically higher or lower than the input voltage. Depending on what the voltage change is and the power requirements, these devices can come in various forms including linear regulators, switching regulators, dc-dc converters, and more. For the TEP 160-4816, its applications and working principles lie in the latter two categories.

The TEP 160-4816 dc-dc converter is a buck converter that is used to reduce input voltage from 48V to 16V. It has wide-filled input range from 36 to 56V, which allows it to take voltage from a variety of different DC power sources. It also has a Constant Current/Constant Voltage (CC/CV) output feature that satisfies the needs of the majority of battery charging applications. The output current is stably adjustable from 0 to 10A, which makes the TEP 160-4816 perfect for multiple purposes such as LED lighting, DC-DC converters, etc.

The TEP 160-4816 has a constant power region of 80W, and operates over an extended temperature range of -35 to 70°C. It supports both single and dual output. Its active PFC (Power Factor Correction) function, output over-voltage protection, and short circuit protection make it a very safe and reliable device. It also has an efficient and high switching frequency, which guarantees its excellent performance and low noise.

From a working principle standpoint, the TEP 160-4816 employs a buck topology design. This type of circuit topology is a non-isolated converter employed to decrease voltage from a higher DC voltage to a lower DC voltage. The TEP 160-4816 works by instantaneously switching on and off a semiconductor switch in order to create a series of pulses. The pulses are then filtered to form the desired output voltage.

In this converter, the switch is formed by a power FET or MOSFET transistor, which is controlled by an active PWM step-down circuit. This circuit consists of two main components: a pulse width modulation (PWM) controller, and a power FET switch. The controller creates PWM pulses, which then turn the FET switch on/off at a certain frequency (commonly 100kHz in TEP 160-4816). As the FET is switched on and off, it produces a series of pulses.

These pulses then pass through a series of inductors, capacitors, and resistors that filter out the extra noise and ripple, and as a result, a stepped-down voltage is achieved. Additionally, the output voltage can also be regulated using a feedback from the output voltage to the error amplifier, which then adjusts the duty cycle of the PWM to maintain a constant output voltage.

Overall, the TEP 160-4816 is a reliable, wide input voltage range, high efficiency, and cost-effective DC to DC converter with multiple applications. It is designed to take 48V input and output 16V with 80W power, along with various safety features mentioned above. Its buck-topology design, coupled with PFC, makes it an ideal device for LED lighting, line-powered communication equipment, industrial automation, railway signal control, and healthcare equipment.

The specific data is subject to PDF, and the above content is for reference