TFM-115-01-S-S-WT

Operating Temperature:	-55°C ~ 125°C
Insulation Height:	0.220" (5.60mm)
Contact Shape:	Square
Contact Finish - Mating:	Gold
Contact Finish Thickness - Mating:	30.0µin (0.76µm)
Contact Finish - Post:	Tin
Contact Material:	Phosphor Bronze
Insulation Material:	Liquid Crystal Polymer (LCP)
Features:	Solder Retention
Overall Contact Length:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Insulation Color:	Black
Current Rating:	2.9A per Contact
Voltage Rating:	275VAC
Mated Stacking Heights:	--
Contact Finish Thickness - Post:	--
Applications:	--
Number of Positions Loaded:	All
Packaging:	Tube
Part Status:	Active
Connector Type:	Header
Contact Type:	Male Pin
Pitch - Mating:	0.050" (1.27mm)
Number of Positions:	15
Number of Rows:	1
Row Spacing - Mating:	--
Series:	Tiger Eye™ TFM
Style:	Board to Board or Cable
Shrouding:	Shrouded - 4 Wall
Mounting Type:	Through Hole
Termination:	Solder
Fastening Type:	Push-Pull
Contact Length - Mating:	0.131" (3.33mm)
Contact Length - Post:	0.078" (1.98mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TFM-115-01-S-S-WT is an industrial electrical connector designed for relatively low powered applications in commercial and industrial environments. The connector is rectangular in shape with two rows of pin connectors on one end and two rows of sockets on the other. This allows for both male and female connections to be made in a single unit. The connector is typically used in applications where there are stricter requirements for dust and water-proofing. Such applications may include marine wiring, where protection from salt water, excessive moisture and dirt are critical components of the design. Other applications may include factory automation lines where dust and heat are present and the wiring must be well protected. The connector has a voltage rating of 50/60 voltage AC or DC, and a current rating of 10A. It is also designed for an operating temperature range between -40 and +125 degrees Celsius. The connector has two styles, a Solder Pin and a plastic Screw Terminal version, and the connectors are designed for wire gauges up to 20 AWG.The connector is composed of two main parts: a housing and the contacts. The housing is a rectangular box that is designed with two rows of pins or sockets at each end. There are two tabs at the side of the housing that allow for orientation. The housing is designed to be dust and water proof when properly sealed and to withstand the rigorous environment within which it is used. The contacts within the housing are made of brass or zinc-alloy, depending upon the application and its environment. These can be fastened to the housing using crimping, soldering, screwing or welding, depending upon the application requirements. The contacts can be used to connect many different types of wiring such as AC and DC wiring, coaxial cables, and others, depending upon the application.The contacts are also designed with insulation displacement technology. This allows the contacts to pierce insulation on a wire without using a separate terminal. This dramatically reduces the time required for installation and allows manufacturers to save time and money by using fewer parts. Overall, the TFM-115-01-S-S-WT is a cost-effective solution for connecting wiring in environments that may be difficult to work in. It is designed with robust materials and insulation displacement technology, and this makes it an ideal choice for a wide range of industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference