Allicdata Part #: | TG-5035CJ-12N26.0000M3-ND |
Manufacturer Part#: |
TG-5035CJ-12N 26.0000M3 |
Price: | $ 0.82 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | OSC VCTCXO 26.000MHZ - SMD |
More Detail: | 26MHz VCTCXO Oscillator 1.7 V ~ 3.6 V Standby (Po... |
DataSheet: | TG-5035CJ-12N 26.0000M3 Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.73710 |
Frequency Stability: | ±500ppb |
Current - Supply (Disable) (Max): | 10µA |
Height - Seated (Max): | 0.032" (0.80mm) |
Size / Dimension: | 0.079" L x 0.063" W (2.00mm x 1.60mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 2mA |
Operating Temperature: | -40°C ~ 85°C |
Absolute Pull Range (APR): | -- |
Series: | TG-5035CJ |
Voltage - Supply: | 1.7 V ~ 3.6 V |
Output: | -- |
Function: | Standby (Power Down) |
Frequency: | 26MHz |
Type: | VCTCXO |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are used in various applications and have two main purposes. The first purpose is to produce a periodic waveform. The second purpose is for use in control of electronic and mechanical systems. An oscillator is a device which produces a continuous, periodic waveform by means of an electronic circuit that is designed to oscillate or vibrate at a certain frequency. The frequency of an oscillator is inversely proportional to its size and power, so a small oscillator would vibrate at a much higher frequency than one of much larger size.
The TG-5035CJ-12N 26.0000M3 oscillator is a type of quartz oscillator that is capable of producing a signal with an accuracy of 26.0000MHz. This quartz oscillator is used in applications such as GPS receivers, cellular telephones, and satellite radio receivers. It is also used in communications systems, avionics, and radar systems. The purpose of this oscillator is to produce a stable signal with high accuracy for use in these applications.
The working principle of the TG-5035CJ-12N 26.0000M3 oscillator is based on the piezoelectric effect of quartz crystals. Quartz crystals have a molecular structure that makes them sensitive to electrical currents, and when an electrical current is applied to the quartz crystal, it causes the crystal to vibrate at its natural frequency. The frequency of the crystal can be adjusted by adjusting the applied electrical current, which can be done using an external circuit or by using a voltage-controlled oscillator (VCO).
Using the quartz oscillator, the TG-5035CJ-12N 26.0000M3 provides a high accuracy signal of 26.0000MHz for use in various applications. It is a low cost, low power solution for use in many applications where precise timing and a high-accuracy signal are necessary. For instance, it is often used in receivers that require a very accurate time reference. This type of oscillator is also used in pilot navigation systems, to ensure the accuracy of the navigational calculations.
The TG-5035CJ-12N 26.0000M3 is a reliable and accurate quartz oscillator that can be used in numerous applications. Its low cost and low power design make it an attractive choice for many applications where a high accuracy signal is needed. This quartz oscillator can be used to ensure the accuracy of time references and navigational calculations, as well as for use in GPS, cellular phone, and satellite radio receivers and communications systems.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...