TG2016SBN 30.0000M-TCGNBM0

Frequency Stability:	±500ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	1.5mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	TG2016SBN
Voltage - Supply:	1.8 V ~ 3.3 V
Output:	Sine Wave
Function:	--
Frequency:	30MHz
Type:	VCTCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are a vital building block in analog and digital electronics. It has the capability to generate a periodic signal or waveforms when a DC voltage is applied to it or when the voltage generated inside the oscillator circuit reaches a certain amplitude. In this article, we are going to discuss about the application field and working principle of a particular type of oscillator i.e. the TG2016SBN 30.0000M-TCGNBM0 oscillator.

Application Field of TG2016SBN 30.0000M-TCGNBM0

TG2016SBN 30.0000M-TCGNBM0 is mainly used to achieve stable and reliable frequency control in a wide range of application fields, such as frequency modulation, radio broadcasting systems, signal generators, frequency dividers, spectrum analyzers, radio receivers, and low-noise sources. This type of oscillator has also found its application in automotive, aviation, and aerospace components. It can also be used as a reference frequency generator. Apart from these, it can also be found in consumer electronics such as radio, television, and mobile phones. Furthermore, this oscillator has the ability to be tuned to very specific frequencies, so it is also used in communications systems such as satellite transmission and other wireless communication.

Working Principle of TG2016SBN 30.0000M-TCGNBM0

TG2016SBN 30.0000M-TCGNBM0 is a highly reliable and stable frequency oscillator. The working principle of this device is based on that of a Transistorized Colpitts Oscillator circuit. It is a type of LC oscillator which attains a stable frequency through the feedback of the Collector Current, in other words, the output current, is regulated by the time it takes for the capacitor\'s parasitic capacitance to charge and discharge. The two transistors used in this oscillator, a PNP or NPN transistor, provide an amplifier which is used to control the output current and in turn the frequency. The oscillation frequency of the RC oscillator is affected by two factors, namely the parasitic capacitance and the charging/discharging time of the capacitor. The feedback is used to make sure that the current reaches a steady state and the circuit creates an RC oscillator. The circuit forms a closed loop so that the current is regulated.The output frequency of an oscillator is determined by the components used in the circuit. The components used in TG2016SBN 30.0000M-TCGNBM0 are carefully selected to produce the exact frequency specified on the device. The RC components can be adjusted in order to attain the desired frequency.The oscillator works by generating alternating high and low levels of electric potentials based on the charging and discharging process of the capacitor, which is regulated by the two transistors. The high and low levels are generated as a sine wave at the desired frequency. The output frequency of the oscillator is determined by the rate of change of the voltage across the capacitor. The rate of change is affected by the size of the capacitor and the resistance of the resistor used in the circuit.

Conclusion

TG2016SBN 30.0000M-TCGNBM0 is a widely used oscillator in the fields of radio broadcasting systems, signal generators, frequency dividers, automotive, aviation, and aerospace components. This type of oscillator is based on the Transistorized Colpitts Oscillator circuit which employs a pair of transistors to regulate the output frequency and the feedback to reach a steady state. The components used in the oscillator are carefully selected to ensure that the frequency generated is accurate and exact. The RC oscillator works by generating sine wave alternating levels of electric potential based on the charging and discharging process of the capacitor regulated by the pair of transistors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description