TIM 3.5-2411

Current - Output (Max):	700mA
Supplier Device Package:	--
Size / Dimension:	0.96" L x 0.57" W x 0.40" H (24.3mm x 14.4mm x 10.2mm)
Package / Case:	16-DIP Module, 7 Leads
Mounting Type:	Through Hole
Efficiency:	79%
Operating Temperature:	-40°C ~ 90°C (With Derating)
Features:	Remote On/Off, OVP, SCP
Applications:	Medical
Voltage - Isolation:	5kV
Power (Watts):	3.5W
Series:	TIM 3.5
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters

DC-DC converters are electrical circuits that transform a DC (Direct Current) voltage from one level to another. A DC-DC converter is also sometimes referred to as a DC-DC transformer, DC-DC module, or DC-DC power supply. The main purpose of a DC-DC converter is to provide a regulated output voltage for an electronic device or circuit. The most common type of DC-DC converter is the Buck Converter, which takes a higher input voltage and steps it down to a lower output voltage. The TIM 3.5-2411 is an example of such a converter.The TIM 3.5-2411 is a DC-DC converter designed for use in industrial, automotive, and military applications. It is a step-down (or buck) converter, meaning it takes a higher input voltage and steps it down to a lower output voltage. It is available in a variety of package sizes, with the most popular being the QFN (Quad Flat No-lead) package for use in embedded systems.The TIM 3.5-2411 is rated for up to 10W of output power and is capable of converting an input voltage of 6-32V DC into an output voltage of 0.8-5V DC. The nominal input voltage for the converter is 12V, and its nominal output current is up to 5A. Its efficiency is up to 95%, allowing it to deliver higher amounts of power with lower amounts of heat generation.The TIM 3.5-2411 has a wide range of operating temperatures, ranging from -40°C to +85°C, and is protected against overload, overvoltage, and undervoltage conditions. It also has protection against short-circuit, reverse current, and over-temperature conditions. The TIM 3.5-2411 is an ideal choice for applications where a very wide input voltage range is required.The TIM 3.5-2411 works by converting the input DC voltage into an alternating current (AC) signal. This is then rectified and filtered into a DC voltage, which is then used to drive the output voltage. The output voltage is regulated by the adjustable feedback voltage circuitry of the converter, which consists of resistors, capacitors, and transistors. These components are arranged in a specific configuration to minimize the time required to adjust the output voltage.The TIM 3.5-2411 has a wide range of applications in the industrial, automotive, and military industries. It can be used for powering industrial machinery, lighting, instrumentation, electronics, communications devices, fuel cells, motors, and sensors. It is also used in automotive and military applications, such as in military aircraft and computer systems, as well as in non-automotive applications such as robotics.In conclusion, the TIM 3.5-2411 is a DC-DC converter designed for use in industrial, automotive, and military applications. It is a step-down (or buck) converter which takes higher input voltage and steps it down to a lower output voltage. It has a wide range of operating temperatures, and its efficiency is up to 95%. The TIM 3.5-2411 is an ideal choice for applications where a very wide input voltage range is required. It has a wide range of applications in the industrial, automotive, and military industries.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description