TLK105RHBT Integrated Circuits (ICs)

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Transceiver
Protocol:	MII, RMII
Number of Drivers/Receivers:	1/1
Duplex:	Half
Data Rate:	--
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	32-VFQFN Exposed Pad
Supplier Device Package:	32-VQFN (5x5)
Base Part Number:	TLK105

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Drivers, Receivers, Transceivers

The TLK105RHBT is a member of the interface-drivers, receivers, and transceivers product family. This type of components are designed to provide various interface functions between high speed ICs, peripheral ICs, high speed CPUs and peripherals. They are used as a means for high-speed communication, and for controlling data, power, and signals between integrated circuits. An interface-driver is a device that functions as the interface between an IC and its peripherals. They serve to level the electrical signals so that other components can accurately read, write, or transmit data. In contrast, a receiver is analogous to a ‘data receiver’ and is designed to receive incoming digital signals, while a transceiver is capable of both sending and receiving digital signals. The TLK105RHBT in particular, is a high-voltage, high-frequency driver and receiver. This product is offered in two variations, for either 3.3V or 5V voltage levels. It takes in TTL or LVCMOS compatible inputs and outputs high voltage differential outputs. The output voltage levels may be set from any degree from 0.7V to 5V. It features a 1-wire serial bus, an output enable input and an enable output pin. This part employs LVDS technology, which stands for Low Vole Differential Signaling. LVDS transmitters and receivers transfer data between two ICs over short distances, and at high speeds. In contrast to other serial protocols, LVDS is capable of transmitting up to 800Mbps data rate with low power consumption, which makes them ideal for low power applications.The TLK105RHBT draws power from either a 3.3V or 5V supply, depending on the selected variation. It supports a wide range of frequencies, with a maximum frequency of 800MHz. Its minimal turn-on time is 4ns when powered with a 5V supply. The chip can sustain a maximum of ±5A peak currents and ±2.5A continuous currents. The IC startup time is 25µs.The TLK 105RHBT also has a wide temperature range and is capable of functioning from 0°C up to +85°C. This makes it a suitable choice for use in a variety of environments. In addition, the device is RoHS compliant and is free from lead and other hazardous substances. This type of high voltage driver is suitable for low noise applications such as flat panel displays, hard disk drives, and networking equipment.In summary, the TLK105RHBT is a high-voltage, high-frequency driver and receiver, belonging to the interface-drivers, receivers, and transceivers family. It can draw power from either a 3.3V or 5V supply and its output voltage levels can be varied from 0.7V to 5V. The device is equipped with a 1-wire serial bus, an output enable input and an enable output pin. It employs LVDS technology, which allows for data transfer between ICs at high speeds with low power consumption. In addition, the device is highly resistant to environmental conditions and hazardous substances. Its primary applications are in flat panel displays, hard disk drives, and networking equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description