TLP385(D4BL-TL,E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optical couplers, are components designed to protect sensitive circuits and components from voltage transients and other electrical noise. The TLP385 (D4BL-TL,E) is a photovoltaic output transistor optoisolator that is specifically designed for both safety and reliability in high-voltage applications.

The TLP385 is an optoisolator that contains an infrared LED, a light-sensitive transistor, and two collectors. The LED is usually connected to the logic input of the device, while both the collector and emitter are connected to the voltage being isolated from the logic. The LED, when activated, emits an infrared light which is detected by the transistor. This transistor switches between a saturated and cut-off state and generates output current in both states.

The TLP385 is suitable mainly for switching applications, but its output current can be used to drive a variety of loads, including linear circuits. It can provide isolation up to 500Vrms working voltage, making it suitable for applications in the field of industrial automation, electrical power systems, and electronic entertainment and medical equipment. Additionally, the TLP385 has a built-in antimicrobial guard, to protect against fungal contamination and bacterial growth.

The TLP385 operates on a constant current, and its LED current doubles when operating in the on-state. The input voltage range for the TLP385 ranges from 4.5 to 36V, and the output voltage at the collector ranges from 0.2 to 15VC. In addition, the collector-emitter voltage is required to be between 0 and 5V. The output electronics in the TLP385 are also designed to minimize noise and maximize pattern recognition.

As the TLP385 is an optoisolator, it essentially provides electrical insulation between the input and the output circuits. It works by converting the input signal into an optical signal, which is then received by the light-sensitive transistor. The collector and emitter of this transistor are then connected to the voltage being isolated, which is then disabled or enabled. This way, the TLP385 can provide isolation from high voltage, and prevent any damage to the sensitive circuits and components connected to it.

While the TLP385 is best suited for high-voltage switching applications, its use cases are not limited to this. As long as the input signal is within the given voltage range, and the output electronics are designed to minimize noise and maximize pattern recognition, it can be used in a variety of applications. Moreover, its built-in antimicrobial guard provides additional protection against fungal contamination and bacterial growth.

The specific data is subject to PDF, and the above content is for reference