TMM-145-06-S-Q

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TMM-145-06-S-Q Application Field and Working Principle

The TMM-145-06-S-Q is one of the many variations of the widely-used and reliable rectilinear connectors, also commonly referred to as Headers and Male pins. In this article, we will review the various applications of this particular model and its working principle.

General Overview

Rectilinear connectors, also known as headers and male pins, have been around for decades. The TMM-145-06-S-Q is a variant of these connectors. It has 6 rows and 5 columns of pins for a total of 30 contacts. These contacts are rated for a maximum current of 3A and a voltage of 250V. The connector’s base material is copper, with the contacts being nickel-plated brass. The contact spacing is 2.54mm or 0.100”. The TMM-145-06-S-Q has a width of 12.7mm (0.50”) and an overall length of 18.3mm (0.72”) from the front face of the mounting board to the end of the pins.

Applications

Due to its reliable contact, wide voltage range and small size, the TMM-145-06-S-Q is widely used in industrial control circuits, telecom equipment, and other electronic devices where a reliable and secure connection is needed. This connector is especially well-suited to motorized vehicles, as it can be used both as a power line or signal line transmission. It can also be used to control data signals in automotive diagnostic and control systems.

Installation and Maintenance

The TMM-145-06-S-Q connector can be mounted on a circuit board or other component with the use of strips or cable ties. The contacts must be soldered securely to ensure a reliable and secure connection. Special care should be taken to ensure that the connector is firmly seated and that all of the contacts are making contact. After installation, the connector should be periodically inspected for signs of wear or corrosion. It is also important to check the contact resistance, because higher contact resistance will result in a lower quality connection.

Working Principle

The TMM-145-06-S-Q uses standard metallic contacts to make an electrical connection between two devices. When the contact is pressed, it presses the pins of the contact against the other device. This creates a low resistance electrical connection between the two parts. The contacts are rated for a maximum current of 3A, meaning that the connector can be used for a wide variety of applications.

The TMM-145-06-S-Q can also be used for signal transmission. This involves sending a digital signal through the contact to control the data line. The signal is sent from each contact to the other when the contact is pressed, and this can be used to control the data line. This allows for digital communication between two devices.

Conclusion

The TMM-145-06-S-Q is a reliable and secure rectilinear connector, commonly referred to as a header or male pin. It is widely used in a variety of applications due to its reliable contact, wide voltage range, and small size. This connector can also be used for signal transmission, allowing for digital communication between two devices. The contacts of this connector should be soldered securely and periodically inspected for signs of wear or corrosion.

The specific data is subject to PDF, and the above content is for reference