Allicdata Part #: | TP2-4R7-R-ND |
Manufacturer Part#: |
TP2-4R7-R |
Price: | $ 0.00 |
Product Category: | Inductors, Coils, Chokes |
Manufacturer: | Eaton |
Short Description: | FIXED IND 4.7UH 1.3A 147.2 MOHM |
More Detail: | 4.7µH Unshielded Toroidal Inductor 1.3A 147.2 mOhm... |
DataSheet: | TP2-4R7-R Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | THIN-PAC™ |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Type: | Toroidal |
Material - Core: | -- |
Inductance: | 4.7µH |
Tolerance: | ±20% |
Current Rating: | 1.3A |
Current - Saturation: | 970mA |
Shielding: | Unshielded |
DC Resistance (DCR): | 147.2 mOhm Max |
Q @ Freq: | -- |
Frequency - Self Resonant: | -- |
Ratings: | -- |
Operating Temperature: | -- |
Inductance Frequency - Test: | 100kHz |
Mounting Type: | Surface Mount |
Package / Case: | Nonstandard |
Supplier Device Package: | -- |
Size / Dimension: | 0.370" L x 0.260" W (9.40mm x 6.60mm) |
Height - Seated (Max): | 0.087" (2.20mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Fixed inductors are electronic devices used to store electrical energy and release it later. The TP2-4R7-R is a type of fixed inductor used in various applications, such as power supplies, FM radio receivers, and audio amplifiers. In this article, we\'ll discuss the applications and working principle of the TP2-4R7-R.
Applications
The TP2-4R7-R is a common application for power supplies, and it’s used to store energy and to filter out noise. It is also used in FM radio receivers, helping to amplify the weak signals received. Additionally, the TP2-4R7-R is used in audio amplifiers, allowing sound to be amplified from a line level signal to a speaker-level signal. It is also used in radio frequency (RF) communication systems, helping to reduce the noise received by the antenna.
Working Principle
The operation of the TP2-4R7-R follows Faraday’s Law of Induction, which states that a changing magnetic field will induce a voltage in a nearby circuit. The TP2-4R7-R is a wounded inductor, meaning that it consists of a coil of wire wrapped around a magnetic core. When current passes through the coil, it generates a magnetic flux which, in turn, induces a voltage in the coil.
The inductor is capable of storing the electrical energy in the magnetic field. When the current flow is stopped, the magnetic flux dissipates, releasing the stored energy back into the circuit. This stored energy can be used for a variety of applications, such as smoothing out power fluctuations in a power supply.
The TP2-4R7-R can also be used as an RF filter, as it can “trap” the unwanted frequencies and prevent them from reaching the load. Furthermore, this device can be used as a transformer, allowing the voltage level on one side of the device to be changed without affecting the load on the other side.
Conclusion
The TP2-4R7-R is a type of fixed inductor that can be used in a variety of applications. Its working principle is based on Faraday’s law of induction and it can be used to store energy, filter out noise, and act as a transformer. As such, it is an indispensable part of a variety of electronic circuits.
The specific data is subject to PDF, and the above content is for reference
FIXED IND 10UH 590MA 350 MOHM10H Unshiel...
FIXED IND 22NH 1.4A 70 MOHM SMD22nH Unsh...
FIXED IND 13NH 600MA SMD13nH Unshielded ...
FIXED IND 680UH 210MA 4.6 OHM680H Unshie...
FIXED IND 470UH 1.3A 280 MOHM TH470H Uns...
FIXED IND 8.2UH 165MA 2.2 OHM TH8.2H Uns...