TPS-30V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electrical components are vital for almost all the industries, and specialty fuses such as TPS-30V form a core of many electrical systems. The TPS-30V is characterised as a thermal protection device. As such, it is a type of fuse that effectively opens the electric circuit when a current exceeding the normal operating current flows through the fuse. This helps to protect such circuits from potential damages caused by overload. The general application fields and working principle of the TPS-30V thermal protection device are explained below.

Application Field

The application field of the TPS-30V device is quite broad, and is basically applicable to most of the direct or alternating current devices such as electrical motors, transformers, generators, and similar components. The TPS-30V is mainly used as a safety device, and can protect against dangerous situations induced by abnormal current jumps. It also plays an important role in other applications, such as isolation control.

Working Principle

The thermal protection device of TPS-30V fuse is designed to disconnect the electrical circuit in the event of overload. It works on the basic principle of thermal runaways (specifically known as “positive runaways”). This means that, when the overload current flows through the fuse, it will heat up the element, thereby increasing current and temperature. This will cause a further increase in current thereby continues until it opens the circuit. The TPS-30V fuse operates with a bi-metallic strip element, which curves when it is heated. This element is positioned so that when the current exceeds the normal operating current, it deflects and breaks the circuit.

The TPS-30V fuse consists of a number of operational parameters, such as the blow time, melting time, and blow energy. These parameters are mainly determined by the fuse element and fuse link, and they can be adjusted in various ways for different applications. The blow time (also known as the response time) of the TPS-30V is normally 38ms or less. The melt time is about 6 times the blow time. Ahigher blow energy is beneficial for long-term protection of the system, especially for relatively high current fusion.

The TPS-30V thermal protection device helps to protect the electrical circuit from overload, and it is applicable to many different application fields. It works on the principle of thermal runaways, and consists of several parameters, such as blow time, melting time, and blow energy. With careful selection and setting of these parameters, the fuse can effectively react to current overloads and protect the circuit from potential danger.

The specific data is subject to PDF, and the above content is for reference