TQ2SS-L2-3V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal Relays are a specialized type of electrical component used to control the operation of larger electrical systems by using low current signals. Among the most commonly used of signal relays are the TQ2SS-L2-3V, because they are designed to work with both AC and DC circuits up to 2 Amps. This article will discuss the application field and working principle of TQ2SS-L2-3V signal relays.

TQ2SS-L2-3V signal relays serve a variety of applications and are commonly used in industrial control systems. They are frequently used to control large, often complex machinery, such as in automated production or assembly lines. The TQ2SS-L2-3V signal relays also have applications in automotive and aerospace applications, such as those used for controlling actuator components that operate based on information sent from a remote source. The TQ2SS-L2-3V signal relays can also be used in consumer electronics, such as home appliances, to route power to various components.

The TQ2SS-L2-3V signal relay is a mechanical switch composed of a contact system actuated by an electromagnet, which is activated by an electrical signal. The contacts are enclosed within an insulating housing and are sealed to protect them from dust and other particles. The electromagnet is responsible for controlling the contact system and making the switch open or close. When activated by an electrical signal, the electromagnet causes the contact system to close, which is referred to as "energizing" the relay. When the signal is removed, the electromagnet releases the contact system and the relay opens, also known as "de-energizing" the relay.

In order to operate efficiently, the TQ2SS-L2-3V signal relays require careful selection of power requirements and application data. When it comes to power supply, these relays require a specific input voltage in order to work properly. AC supply requires between 85 and 140 volts and DC supply requires between 30 and 60 volts. The TQ2SS-L2-3V relays also have an amperage capacity up to 2 amps. In addition, the relay must be used within its temperature range, as listed in its instruction manual.

Once the power requirements are set, the TQ2SS-L2-3V signal relay must be set up properly. The standard procedure is to attach the relay to the control panel and then wire the incoming and outgoing of the relay to the wiring harness of the device. When wiring the relay, the contacts must be wired according to their description; for example, the normally closed (NC) contact must be wired to the negative side of the circuit and the normally open (NO) contact must be wired to the positive side. Once wired, the relay can be activated by applying an electrical signal to the electromagnetic coil.

When the relay is in its energized mode, the contact system closes, allowing the current to flow through the gate to the connected device. This allows the device to be powered and perform its task. When the relay is in its de-energized mode, the contact system opens and the gate is no longer connected to the gate devices, thus preventing the current from flowing.

TQ2SS-L2-3V signal relays provide reliable and efficient operation and are popular in industrial applications. The relays are easy to install and utilize, although care must be taken to select the proper power requirements and to wire the contacts correctly. With a maximum amperage capacity of 2 amps, the TQ2SS-L2-3V signal relays are a go-to choice for many control systems and consumer electronics.

The specific data is subject to PDF, and the above content is for reference