TRS232ECN

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	500mV
Data Rate:	250kbps
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	16-DIP (0.300", 7.62mm)
Supplier Device Package:	16-PDIP
Base Part Number:	TRS232E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Drivers, Receivers, Transceivers: TRS232ECN

The TRS232ECN is an interface standard that was developed to make connections between digital devices easier and more reliable. This interface standard is often used to connect microcontrollers, laptops, and other computing equipment to peripherals and external devices. It has become a popular choice for embedded systems and automotive applications.

History

The TRS232ECN was first introduced in the late 1970s and has been in use ever since. It was developed as an improvement upon the RS-232 interface, which was commonly used at the time. The TRS232ECN improved upon the RS-232 interface by providing greater speed, better data transmission reliability, and more efficient data packet structure.

Physical Description

The TRS232ECN is a 9-pin D-shaped connector. On one end, the connector contains nine pins that are typically labeled from 1 to 9. On the other end is a 9-pin “D” shape. The pin labeling is different from the standard RS-232 connector.

Data Transfer

The TRS232ECN is designed to transfer data at rates of up to 10 megabits per second. It can also be configured for up to 128 kilobytes of data in each packet. The TRS232ECN uses a symmetric start-stop framing protocol to control the flow of data.

Error Detection and Prevention

The TRS232ECN uses a parity bit to detect errors. It also utilizes a data packet checksum to verify the integrity of the data being sent. The data packet size can be configured to one of four different packet sizes, allowing for greater flexibility.

Power Requirements

The TRS232ECN requires five volts of power to operate. It is also capable of receiving power from an external power source. The device is powered off of the host device, so if the host device is turned off, the TRS232ECN will also be powered off.

Applications

The TRS232ECN is widely used for embedded systems applications and for connecting microcontrollers, laptops, and other digital devices to peripherals and external devices. It is also often used for communication between computers in factory settings. Additionally, the TRS232ECN is an ideal choice for automotive applications, as it is designed to withstand harsh environment conditions.

Conclusion

The TRS232ECN is a reliable and efficient interface standard that is widely used to connect digital devices. It has become a popular choice for embedded systems and automotive applications, as it offers greater speed, better data transmission reliability, and more efficient data packet structure than its predecessor, the RS-232 interface. It is also capable of receiving power from an external source and is able to connect to peripherals and external devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description