TSC-112L3H,000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal Relays are useful devices in the electrical and electronics industry, as they are used to control circuits and provide protection from over current and over voltage situations. The TSC-112L3H,000 Signal Relay is used in many different applications and can be used for both AC and DC signals.

The TSC-112L3H,000 is a powerful and reliable signal relay and is designed for applications that require a large current of up to 2 Amps. It has a nominal voltage rating of 125V AC and a contact form of 4PDT. The contact form of 4PDT is important as it allows the relay to change between different states when needed. The maximum switching frequency of the relay is 5 times/minute at 24V AC, and can go up to 10 times/minute for 12V AC input. It also has a high dielectric strength (3000V AC insulation) which provides protection against overvoltage spikes.

The working principle of the TSC-112L3H,000 Signal Relay is based on the use of magnetism to activate a switch. The interior of the relay contains a sensitive electromagnet, which is triggered when an electrical current is applied. When this current is applied, the electromagnet pulls the moving core inside the switch, which causes the contacts to toggle between open and close states. This changes the connection between the load and the signal which is being sent by the relay. This is a very reliable mechanism for controlling signals and circuits.

The TSC-112L3H,000 is a versatile signal relay and is used in a variety of applications. It can be used in automotive systems to control the signals that control the fuel and ignition systems. It can also be used in industrial or home robotics to control signal actuators, motors and other electronics. In addition, it can be used in audio systems to switch audio channels and switch audio sources. Finally, the TSC-112L3H,000 is a very common signal relay in consumer electronics such as televisions, DVD players and VCRs and is used to switch between inputs and outputs.

In conclusion, the TSC-112L3H,000 Signal Relay is a robust and reliable device for controlling signals of up to 2 Amps. It is used in a variety of applications and is designed for both AC and DC signals. It has a protective dielectric strength, which prevents overvoltage damage and increases its lifetime. The relay works on the principle of magnetism, which enables it to switch between different states, depending on the current being applied.

The specific data is subject to PDF, and the above content is for reference