TSM-110-03-L-DH-LC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular connectors are a device used to provide an electrical connection between two components, combining mechanical and electrical properties in one device. A TSM-110-03-L-DH-LC rectangular connector, also known as a header, is primarily used as an interconnection interface in radio frequency (RF) applications and can be used in millimeter wave integration circuits. This article covers the application field and working principles of this type of connector.

Application Field

The TSM-110-03-L-DH-LC connector is a high temperature, high frequency, low insertion and loss series header. It is widely used in a variety of application areas such as telecommunications, instrumentation, aerospace and defense, and RFID. In the telecommunications sector, it is commonly used in mobile phones, base stations, and connector interface modules, as well as for broadband EC & M systems. In the instrumentation sector, it is used for instrumentation control, medical equipment, and electronic measuring instruments.

The low loss characteristics of TSM-110-03-L-DH-LC make it suitable for applications which require high data transfer rate such as broadband and high frequency products for private networks and military systems. Additionally, it is used for broadband infrastructures and antennas for defense and aerospace equipment.

TSM-110-03-L-DH-LC is also suitable for RFID applications that require low power source rate and short range. The contact electrical resistance between the header and the pin is also low, making it a reliable connection for medical instruments such as CT scanners, MRI scanners and Pacemaker analyzers.

Working Principles

The base of TSM-110-03-L-DH-LC is a mono-pole pin-like structure which has a 50 Ohm characteristic impedance. The pin is inserted horizontally into the inner two pins of the header and is connected by soldering. The soldering can be either soldered directly with tin or with a standard connector.

The thermal design of TSM-110-03-L-DH-LC is intended to dissipate the heat generated from the components inside the connector, ensuring its long-term operability. This thermal design encompasses a stainless steel waveguide cover, an enclosed conductive path, an injection molded body, and a special waveguide with full depth cooling slots.

The RF performance of a TSM-110-03-L-DH-LC connector can be increased by increasing the impedance tolerance and adding a decoupling system. A 50 Ohm decoupling system can be used on the both sides of the header in order to improve the signal by reducing the EM interference. This can be done by adding a resistor, capacitor and inductor in series with the pin.

This type of connector is designed to fit in many types of PCBs such as microstrip, embedded, and hand-wired. The design offers high performance, low noise radiation, and low costs. The TSM-110-03-L-DH-LC is a reliable high-frequency, high-temperature connector that is suitable for a variety of demanding radio frequency, telecommunications, and instrumentation applications.

The specific data is subject to PDF, and the above content is for reference