TSOP36233TT

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Sensing Distance:	45m
B.P.F. Center Frequency:	33.0kHz
Voltage - Supply:	2.5V ~ 5.5V
Current - Supply:	350µA
Orientation:	Side or Top View
Mounting Type:	Surface Mount
Operating Temperature:	-25°C ~ 85°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical Sensors are a broad classification of sensing devices that detect or measure light. They are specifically designed to detect the visible or infrared light energy in various environments. Photo Detectors are a subset of optical sensors that convert light energy into electrical signals. They typically utilize a photodiode, a phototransistor, an LED or a photoresistor. Remote Receiver is a specific type of photo detector that is used to receive infrared signals from remote controllers and similar devices.TSOP36233TT is a remote receiver that utilizes a Germanium PIN Photo Diode, an infrared band-pass filter and a built-in amplifying circuit. It is designed to detect bursts of infrared light when a specific number of consecutive pulses are sent from the remote controller. This device offers a narrow acceptation range of +/- 10 nm, and has an output current of 1.0mA max.TSOP36233TT Application FieldThe TSOP36233TT is used for infrared remote control applications in consumer electronic devices such as cameras, gaming systems, Set Top Boxes, TVs, audio systems and other appliances. It can also be used in portable hand-held devices like mobile phones, pads and GPS trackers.TSOP36233TT Working PrincipleThe TSOP36233TT works by detecting specific concentrations of infrared radiation. When an infrared signal is transmitted from the remote controller, it is picked up by the diode and converted to a current signal. This current signal is then amplified by the integrated amplifier circuit and is output as a regulated voltage. The output voltage is then interpreted by the microcontroller, allowing it to detect the presence or absence of the infrared signal.When the TSOP36233TT is not detecting any infrared radiation, the output voltage remains low, indicating that the remote is off. When the presence of the infrared signal is detected, the output voltage of the receiver rises, indicating that the remote is on. This allows the signal to be interpreted and used accordingly by the microcontroller.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description