TSOP39236

Series:	--
Packaging:	Bulk
Part Status:	Active
Sensing Distance:	45m
B.P.F. Center Frequency:	36.0kHz
Voltage - Supply:	2.5V ~ 5.5V
Current - Supply:	450µA
Orientation:	Top View
Mounting Type:	Through Hole
Operating Temperature:	-25°C ~ 85°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
TSOP39236 is a remote receiver designed by HomeToys, a manufacturer of optical sensors, photo detectors, and other similar products. It uses a high-powered photo diode that allows it to pick up signals from long-distance remote controls and is also used for applications such as digital amplifiers, television remotes, and motion detectors.

Applications
TSOP39236 is used for applications like amplifiers, remote controls, and motion detection. It is primarily designed for television sets to receive signals from infrared remote controllers. It is also used in digital audio systems that require a passive infrared sensor to detect sound waves. Motion detectors are also able to use the TSOP39236 to detect the movement of people or animals.

Working Principle
The TSOP39236 works by using a high-powered photo diode to pick up signals from the infrared remote controllers. The photo diode is sensitive to infrared radiation, which is emitted by a remote. As the remote sends out its signal, the photo diode actively captures the signal and converts it into an electrical signal. The signal is then decoded and translated into commands that are used by the television set or audio system.

Performance
The TSOP39236 is designed to be capable of receiving signals from up to 8 meters away with a signal strength of up to 1000 mW/m2. It also has an open collector output with a current of 30mA and a voltage of 1.5V. This makes it suitable for connected to a wide array of devices, such as remotes, amplifiers, and motion detectors.

Conclusion
In conclusion, the TSOP39236 is a remote receiver that is designed and manufactured by HomeToys for use in various applications. It utilizes a high-powered photo diode to detect signals from a remote controller and converts them into electrical signals that are decoded and translated into commands. It has an impressive range of up to 8 meters and can handle signals up to 1000 mW/m2. It is also compatible with a variety of devices and has an open collector output with a current of 30mA and a voltage of 1.5V.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description