TSOP4440

Series:	--
Packaging:	Bulk
Part Status:	Active
Sensing Distance:	45m
B.P.F. Center Frequency:	40.0kHz
Voltage - Supply:	2.5V ~ 5.5V
Current - Supply:	700µA
Orientation:	Side View
Mounting Type:	Through Hole
Operating Temperature:	-25°C ~ 85°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to TSOP4440

The TSOP4440 is an infrared remote receiver, a type of photo detector, used within an optical sensor system. It is specifically designed for remote control applications which require very high sensitivity and a wide operating angle. This article will focus on providing background information on the TSOP4440 and its application, as well as offering a detailed description of its working principles.

TSOP4440 Application

The TSOP4440 is a popular device used in virtually any remote control system because of its excellent performance, high reliability and cost effectiveness. It is most commonly used in consumer electronics, such as TVs, DVD players, and Satellite Receivers, but it is also found in industrial, medical, and other commercial applications. Furthermore, the TSOP4440 is commonly incorporated into automotive remote control systems and home automation systems to enable remote functions such as unlocking doors, controlling lighting, or triggering alarms.The TSOP4440 is designed to receive signals from a standard 38kHz infrared transmitter, such as an Infrared Remote Control (IRC). To receive the signal, the TSOP4440 uses an internal photodiode, which is covered with an infrared-blocking filter. In this way, only infrared radiation from the transmitter is detected, and any other extraneous radiation in the environment is filtered out. The TSOP4440 is sensitive up to a distance of 5 meters and is capable of operating in a wide angle up to 90 degrees, making it an ideal choice for many applications.

TSOP4440 Working Principle

The TSOP4440 has a simple internal circuit, consisting of a photodiode which converts the incoming infrared light into a current, and an amplifier which amplifies the current and outputs it as a voltage signal. When the TSOP4440 detects infrared radiation from a transmitter, the current is amplified and the output voltage is high, indicating the presence of the signal. When no signal is detected, the output voltage is low with respect to the ground level. The programming of the TSOP4440 is done using external components. Depending on the exact application, an RC network may be used to set the sensitivity, an inductor may be used to adjust the gain, and a capacitor may be used to reduce the noise. These components can be customized to get the desired performance from the system.

Conclusion

The TSOP4440 is a reliable, highly sensitive infrared receiver, primarily designed for remote control applications. It is used in a variety of consumer and industrial products, as well as automotive and home automation systems to provide remotely triggered functions. It has a simple internal circuit design which consists of a photodiode and an amplifier, and can be programmed using external components to provide the desired performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description