TXD2SS-1.5V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal relays are electronic components designed to remotely control a circuit through a low voltage signal. Generally, relays are found in devices with multiple voltages where the electrical load must be switched using a low voltage signal. This is especially useful in applications where safety is a concern, as manual switching of a high voltage circuit can be hazardous. TXD2SS-1.5V signal relays are designed to switch up to 2 amps with a two-state operation, typically on or off.

The relay is a type of electronic switch controlled by an electromagnet. It is composed of an actuator, multiple terminals, a movable shielded core, an electromagnetic coil, and a permanent magnet. When a low voltage electrical current is applied to the coil, it readily induces magnetism which causes the switch to close. To ensure reliability in the switching, the core is shielded and the movable contacts are plated with a material or alloy capable of enduring wear and preventing arcing. This design is common to most switches and relays, particularly in the TXD2SS-1.5V signal relays.

TXD2SS-1.5V signal relay is designed for remote control applications. The relay uses a low voltage signal (usually 24Vdc/ac) to control a circuit with magnetic latching. This relay is Activator with a signal activated latch, meaning that it requires an activation signal to operate and then latches in the on or off position. A secondary signal is then required to switch off the relay. This type of operating mode provides a high level of security as any interruption of the circuit does not disrupt the operation of the relay. This makes the TXD2SS-1.5V signal relay suitable for use in security systems, gas and oil management systems, and medical equipment.

The TXD2SS-1.5V signal relay is used in many applications where a low voltage signal is required to control a high voltage switch. In addition to security systems, the relay can be used in motor control systems, remote-controlled switches, and lighting systems. The main advantage of using this type of signal relay is its compact size that allows for easy installation in confined spaces. The reliable operation and high voltage switching capacity make it an ideal choice for a variety of signal control applications.

The operation principles of any type of relay is essentially the same. When a current, normally in the form of a low voltage signal, is applied to the coil, it induces a magnetic field which changes the position of the contacts. Depending on which type of relay is being used, the contacts open or close. In the case of TXD2SS-1.5V signal relays, the output contacts open and close when the signals are applied. The contacts can be wired in either an NC (normally closed) or NO (normally open) configuration depending on the application. When the sensor detects the desired condition, the applied voltage triggers the activation of the relay, causing the contacts to open or close.

TXD2SS-1.5V signal relays are reliable, efficient, and durable components designed to control high voltage with a low voltage signal. This makes them suitable for many industrial and commercial settings where manual switching of the circuit is not an option. The relay is also available in a wide range of sizes and power ratings, making it suitable for a variety of applications. This type of signal relay is a versatile component that can be used in a wide range of applications, from motor control, lighting control, to security system control.

The specific data is subject to PDF, and the above content is for reference