Allicdata Part #: | TXM-433-KH3-ND |
Manufacturer Part#: |
TXM-433-KH3 |
Price: | $ 8.43 |
Product Category: | RF/IF and RFID |
Manufacturer: | Linx Technologies Inc. |
Short Description: | TX RF W/ENCODER 433MHZ |
More Detail: | RF Transmitter ASK, OOK 433MHz 4dBm Castellation ... |
DataSheet: | TXM-433-KH3 Datasheet/PDF |
Quantity: | 163 |
1 +: | $ 7.66080 |
25 +: | $ 7.08750 |
100 +: | $ 6.70572 |
Series: | KH3 |
Packaging: | Tube |
Part Status: | Active |
Frequency: | 433MHz |
Applications: | Home/Industrial Automation, Lighting, Remote Control, RKE |
Modulation or Protocol: | ASK, OOK |
Data Rate (Max): | -- |
Power - Output: | 4dBm |
Current - Transmitting: | 2.7mA |
Data Interface: | Parallel |
Antenna Connector: | Castellation |
Memory Size: | -- |
Features: | Built-in Remote Control Encoder |
Voltage - Supply: | 2.7 V ~ 5.2 V |
Operating Temperature: | -30°C ~ 70°C |
Package / Case: | 27-SMD Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.RF Transmitters, such as the TXM-433-KH3, are used to transmit information reliably over short distances. This type of technology is commonly used in consumer electronics, automotive applications and industrial applications. The TXM-433-KH3 is a type of radio frequency transmitter that operates in the 433MHz frequency range and is designed for low power, low cost applications. This type of transmitter is ideal for applications where reliable and long-distance transmission is required.
The TXM-433-KH3 is a wireless transmitter that works on the principle of radio wave propagation. It is a low power transmitter that uses frequency modulation (FM) for transmission. The transmitter employs a Direct Sequence Spread Spectrum (DSSS) technique to spread the signals over a wider bandwidth, which increases its range. The maximum data rate that can be achieved using the TXM-433-KH3 is 100kb/s. The transmitter also has a power output of 16dBm which allows it to reach up to 500 meters in open air.
The TXM-433-KH3 is mainly used in applications where low power and low noise transmission is required. It is commonly used in applications such as remote control systems, smart home systems, medical device monitoring, and identification systems. The transmitter is also a reasonable choice for wireless alarm systems as its output power is low and is suitable for unlicensed operations. In addition, the transmitter has a very low power consumption which makes it ideal for battery-powered applications.
The TXM-433-KH3 is also used in RFID systems where it can be used to send and receive commands and data between the RFID reader and the tag. The transmitter is able to provide up to a maximum of 128 different ID codes that can be used to identify different tags. The signals can be encoded to provide authentication and security of the data being transmitted.
When using the TXM-433-KH3, it is important to note that the transmitter has a relatively short range in terms of distance, up to 500 meters in open air. Furthermore, it is important to keep the transmitter away from any sources of interference as it can cause errors in the transmitted data. It is also essential to ensure that the antenna position is correct to ensure that optimum performance is achieved.
In summary, the TXM-433-KH3 is a low cost and low power RF transmitter that is widely used in a variety of applications. It is easy to install and operate and provides reliable and secure transmission up to a distance of 500 meters in open air. With its long range and low power usage, the TXM-433-KH3 is an ideal choice for a number of wireless applications.
The specific data is subject to PDF, and the above content is for reference
IC RF TX SNGL-CHIP LP 16-QFNRF Transmitt...
IC TXRXRF Transmitter 800MHz ~ 4GHz ...
IC TX 868MHZ 200MW 28TQFNRF Transmitter ...
IC REMOTE KEYLESS ENTRY 20TSSOPRF Transm...
433MHZ ASK/OOK TRANSMITTER MODULRF Trans...
315MHZ ASK/OOK TRANSMITTER MODULRF Trans...