UEE-5/30-D48N-C Power Supplies - Board Mount |
|
Allicdata Part #: | UEE-5/30-D48N-C-ND |
Manufacturer Part#: |
UEE-5/30-D48N-C |
Price: | $ 28.56 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Murata Power Solutions Inc. |
Short Description: | DC DC CONVERTER 5V 150W |
More Detail: | Isolated Module DC DC Converter 1 Output 5V 30A... |
DataSheet: | UEE-5/30-D48N-C Datasheet/PDF |
Quantity: | 1000 |
42 +: | $ 25.96230 |
Current - Output (Max): | 30A |
Power (Watts): | 150W |
Voltage - Isolation: | 2.25kV |
Applications: | ITE (Commercial) |
Features: | Remote On/Off, OCP, OTP, OVP, SCP, UVLO |
Operating Temperature: | -40°C ~ 85°C |
Efficiency: | 92% |
Mounting Type: | Through Hole |
Package / Case: | 8-DIP Module, 1/8 Brick |
Size / Dimension: | 2.30" L x 0.90" W x 0.42" H (58.4mm x 22.9mm x 10.7mm) |
Control Features: | Enable, Active Low |
Series: | UEE 150W |
Packaging: | Tray |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 36V |
Voltage - Input (Max): | 75V |
Voltage - Output 1: | 5V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices used to convert power from one type of source to another type. This is done by changing the voltage and/or current of the input power to higher or lower values. The UEE-5/30-D48N-C is an example of a DC-DC converter. It is a high-performance, isolated, high-efficiency, Switch mode power supply. This converter is used for a wide range of industrial and consumer applications.
The UEE-5/30-D48N-C DC-DC converter has an input voltage range of 5 to 30 volts. It provides an output of 48 volts and a maximum power of 240 watts. This converter is equipped with a wide range of protection features including overvoltage, overcurrent, and reverse polarity protection as well as a low-power shutdown. This means that it is reliable and safe to operate.
The UEE-5/30-D48N-C is an idea converter for a variety of different applications. It can be used in motor drivers, power supplies, industrial high-precision equipment, power management systems, and more. It is also suitable for use in HVAC systems and EV charging.
The working principle of the UEE-5/30-D48N-C is based on the Buck topology. This topology allows for high efficiency and low noise. The converter works by converting an AC input voltage into a DC voltage. In order to do this, it uses two switching transistors which are driven by a control circuit to switch back and forth between the input and output sides. On each path, there is a rectifier circuit which rectifies the alternating current to a direct current. The control circuit then adjusts the duty cycle of the two transistors to control the output voltage.
The design of the UEE-5/30-D48N-C converter also ensures high accuracy and low ripple. This is possible because it uses a precise voltage reference circuit and a feedback loop. The feedback loop controls the output so that it is always within the specified tolerance range. The use of advanced control techniques also helps to reduce power consumption and improve efficiency.
The UEE-5/30-D48N-C is an excellent choice for applications requiring reliable and efficient power conversion. It has a wide input voltage range, high efficiency, and precision output control. It is easy to install and offers superior reliability and safety. It is therefore suitable for a variety of industrial and consumer applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...