UHE-5/5000-Q48N-C

Current - Output (Max):	5A
Control Features:	Enable, Active Low
Size / Dimension:	2.00" L x 1.60" W x 0.40" H (50.8mm x 40.6mm x 10.2mm)
Package / Case:	9-DIP Module, 8 Leads
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 85°C
Features:	Remote On/Off, OCP, OTP, SCP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	1.5kV
Power (Watts):	25W
Series:	UHE
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	75V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC–DC converters are power electronic circuits that increase or decrease the voltage of a DC source. The most common converter is the UHE-5/5000-Q48N-C, which is a step down converter. It is capable of reducing a 12V voltage source to a voltage between 1V and 5V.The UHE-5/5000-Q48N-C consists of two basic components: the transformer and the rectifier. The transformer converts the incoming voltage to a lower voltage, which is then rectified and released to the load.The transformer is an intermediate stage in the power supply in which electrical energy is transferred from one circuit to another through the magnetic field. The transformer converts the voltage through an electromagnetic transformer core. The transformers primary winding is connected to the input voltage and the secondary winding is connected to the rectifier.The rectifier is used to rectify the alternating current from the transformer\'s secondary winding. It is usually a half wave or full wave rectifier that is made up of rectifier diodes. A full wave rectifier has two diodes that are connected inversely so that the current alternates between each diode, creating a "full cycle" of current. The current then flows into the load.The primary goal of the UHE-5/5000-Q48N-C is to provide a regulated supply voltage to the load, which is typically a device or instrument. It does this by controlling the output voltage of the converter by adjusting the power transferred from the primary to the secondary winding. This is accomplished by varying the amount of current that flows through the transformer\'s primary winding. The output voltage is then adjusted accordingly.The working principle of the UHE-5/5000-Q48N-C is based on the concept of maximum power transfer. Maximum power transfer is when a source transmits maximum power to a load. This is accomplished by matching the source resistance to the load resistance. Since the output of the UHE-5/5000-Q48N-C is determined by adjusting the primary current, it is able to match the load resistance and achieve maximum power transfer.The UHE-5/5000-Q48N-C has a number of applications, including DC lighting systems, microprocessor operation, and telecommunication systems. It is also commonly used as a power supply for medical applications, such as powering MRI machines.The UHE-5/5000-Q48N-C has become the preferred choice of consumers as it is reliable and efficient, and its maximum power transfer capability makes it the ideal candidate for a variety of applications. It is also highly affordable and easy to use, making it a great choice for both DIY and professional users.

The specific data is subject to PDF, and the above content is for reference