Allicdata Part #: | ULE-2.5/20-D24P-C-ND |
Manufacturer Part#: |
ULE-2.5/20-D24P-C |
Price: | $ 40.45 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Murata Power Solutions Inc. |
Short Description: | DC DC CONVERTER 2.5V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 2.5V 2... |
DataSheet: | ULE-2.5/20-D24P-C Datasheet/PDF |
Quantity: | 1000 |
84 +: | $ 36.76690 |
Power (Watts): | 50W |
Voltage - Isolation: | 2.25kV |
Applications: | ITE (Commercial) |
Features: | Remote On/Off, OCP, OTP, SCP, UVLO |
Operating Temperature: | -40°C ~ 85°C |
Efficiency: | 88.5% |
Mounting Type: | Through Hole |
Package / Case: | 8-DIP Module, 1/8 Brick |
Size / Dimension: | 2.22" L x 0.89" W x 0.41" H (56.4mm x 22.6mm x 10.4mm) |
Control Features: | Enable, Active High |
Series: | ULE |
Packaging: | Tray |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 18V |
Voltage - Input (Max): | 36V |
Voltage - Output 1: | 2.5V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 20A |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are electronic components used to convert one type of DC voltage or current level to another. The ULE-2.5/20-D24P-C is a high-performance DC to DC converter designed for a variety of applications. It has a wide operating temperature range and is designed for harsh industrial environments.
Operating Principle
The ULE-2.5/20-D24P-C converter uses a basic step-down voltage converter topology that converts a higher DC voltage to a lower DC voltage, or vice versa. The ULE-2.5/20-D24P-C typically operates from a 24 VDC input voltage and provides a 2.5 VDC output voltage, up to 20 Amps of current output. The steps down converter consists of an inductor, an input and output capacitors, a rectifier, a switching transistor, and a control circuit.
The input voltage is applied to the switching transistor which switches at a set frequency. When the transistor is on, the input voltage is applied to the inductor and the output voltage is clamped to ground. When the transistor switches off, the output voltage is applied to the inductor. The inductor holds the energy from the input voltage and provides it to the output voltage.
The control circuit monitors the output voltage level and adjusts the duty cycle of the switching transistor to maintain the desired output voltage. The Hz rate of the converter can be adjusted to match the load demands, increasing efficiency. This type of converter can provide efficiency up to 95%.
Applications
The ULE-2.5/20-D24P-C DC to DC converter is ideal for a variety of applications requiring a step down voltage converter. It is most commonly used in industrial applications, such as process control systems, automation equipment, 3D printers, and motion control systems. The converter is also suitable for many transportation applications, such as electric vehicle charging systems, buses, and trains.
The ULE-2.5/20-D24P-C converter offers many features, such as high efficiency, wide input voltage range, wide operating temperature range, and remote on/off control. The converter is also designed for long life and low cost of ownership. It meets harsh industrial specifications, including EN55011 level B emissions and IEC 61000-4-2 immunity.
The ULE-2.5/20-D24P-C converter is an ideal solution for applications requiring a reliable, high-performance step-down voltage converter. With its wide range of features and wide input and output voltage levels, the converter is suited for a variety of commercial and industrial applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...