Allicdata Part #: | ULS-3.3/8-D48N-C-ND |
Manufacturer Part#: |
ULS-3.3/8-D48N-C |
Price: | $ 17.26 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Murata Power Solutions Inc. |
Short Description: | DC DC CONVERTER 3.3V 27W |
More Detail: | Isolated Module DC DC Converter 1 Output 3.3V 8... |
DataSheet: | ULS-3.3/8-D48N-C Datasheet/PDF |
Quantity: | 1000 |
128 +: | $ 15.69390 |
Current - Output (Max): | 8A |
Control Features: | Enable, Active Low |
Size / Dimension: | 1.30" L x 0.90" W x 0.40" H (33.0mm x 22.9mm x 10.2mm) |
Package / Case: | 8-DIP Module, 1/16 Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | Remote On/Off, OTP, OVP, SCP, UVLO |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 2.25kV |
Power (Watts): | 27W |
Series: | ULS |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 3.3V |
Voltage - Input (Max): | 75V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The ULS-3.3/8-D48N-C is a step-down DC to DC converters, primarily used for providing reliable power distribution in a variety of commercial and industrial applications in which reliable power is required. Such applications include process control systems, robotics, vehicle systems, datacenters, network infrastructures, and consumer electronics.
ULS-3.3/8-D48N-C converters are built using a robust construction, with components that are designed for high current loads and superior temperature stability. This construction ensures a reliable performance in a wide variety of applications. The converters come with adjustable output voltages in a range from 3.3 to 8 volts DC.
The ULS-3.3/8-D48N-C is a step-down converter – meaning that it converts a higher voltage DC power source into a lower voltage power source. It does this by using a series of electrical components to regulate the incoming power supply. These components include a transformer, rectifier diodes, inductors, and filter capacitors.
The transformer is used to reduce the incoming voltage to a secondary voltage that is the desired output voltage. The rectifier diodes are responsible for converting the alternating current of the transformer into a direct current. This direct current then passes through the inductors, which serve to filter the current, eliminating any unwanted noise or harmonics. Finally, the filter capacitors are used to store energy and help to reduce the output ripple.
This entire process is then regulated by a feedback circuit. This feedback circuit provides feedback to the converter about the output voltage and makes adjustments based on the incoming power to ensure a constant output voltage. The ULS-3.3/8-D48N-C also has the ability to provide up to 5 amps of output current.
The ULS-3.3/8-D48N-C is a reliable and efficient power distribution solution for a wide range of commercial and industrial applications. It is designed with robust components that ensure reliable performance in any application. It is also adjustable, allowing for a wide range of output voltages to suit the needs of any application. Finally, its feedback mechanism helps to ensure a constant output voltage, making it a reliable power distribution solution.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...