UPG6-27822-11 Circuit Protection

Series:	UPG
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	1
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers The UPG6-27822-11 circuit breaker is a device designed to protect electrical wiring and equipment from damage due to overload or short circuit. It works by breaking an electrical circuit, preventing current from flowing, and can handle high voltage loads. Circuit breakers are an essential component of any electrical system. The UPG6-27822-11 circuit breaker is widely used in industrial, commercial, and residential settings. It is designed to be used in systems with higher voltage applications such as 660V or 690V. The breaker is UL listed and CSA certified for 600V Class C or higher circuit breakers. It is also designed to meet the NEC requirements for arc fault protection.The UPG6-27822-11 is a double pole circuit breaker that has two independent switches that can be operated or manually reset. Each pole can handle up to 30 amps of current. It is rated for cords and wires up to 690 volts and can handle loads of up to 240 amps. The circuit breaker also features indicator lights that will light up when either pole is tripped or if an abnormality is detected. The UPG6-27822-11 circuit breaker is designed with a thermal-magnetic trip system. This system combines both thermal and magnetic forces that act on the breaker and break the circuit when current rises beyond the load rating. The thermal trip is activated when the current rises above the set thermal trip point. This will cause the breaker to trip and open the circuit. The magnetic trip is activated when the current surges above the set magnetic trip point. This will cause the breaker to trip and open the circuit. The UPG6-27822-11 circuit breaker also features an internal circuit interrupter and a manual reset switch. The internal circuit interrupter will trip the breaker when the current rises above the rated trip point. The manual reset switch allows you to manually reset the breaker by pressing the switch and breaking the circuit. This can be used in situations where the current is too high and the breaker needs to be manually reset. The UPG6-27822-11 circuit breaker is designed for a wide range of applications such as residential, commercial and industrial settings. It is perfect for use in 660V or 690V circuits and can handle loads of up to 240 amps. The breaker is also UL listed and CSA certified for 600V Class C or higher and meets all NEC requirements for arc fault protection. With its thermal-magnetic trip system, internal circuit interrupter, and manual reset switch, the UPG6-27822-11 circuit breaker is an essential component of any electrical system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description