Allicdata Part #: | UQQ-3.3/25-Q12N-C-ND |
Manufacturer Part#: |
UQQ-3.3/25-Q12N-C |
Price: | $ 69.66 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Murata Power Solutions Inc. |
Short Description: | DC DC CONVERTER 3.3V 82W |
More Detail: | Isolated Module DC DC Converter 1 Output 3.3V 2... |
DataSheet: | UQQ-3.3/25-Q12N-C Datasheet/PDF |
Quantity: | 1000 |
30 +: | $ 63.32760 |
Packaging: | Tube |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 9V |
Voltage - Input (Max): | 36V |
Voltage - Output 1: | 3.3V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 25A |
Power (Watts): | 82W |
Voltage - Isolation: | 2kV |
Applications: | ITE (Commercial) |
Features: | Remote On/Off, OTP, OVP, SCP, UVLO |
Operating Temperature: | -40°C ~ 85°C |
Efficiency: | 88% |
Mounting Type: | Through Hole |
Package / Case: | 8-DIP Module, 1/4 Brick |
Size / Dimension: | 2.22" L x 1.45" W x 0.50" H (56.4mm x 36.8mm x 12.7mm) |
Control Features: | Enable, Active Low |
Series: | UQQ |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are a type of power supply that converts direct current (DC) to a different voltage level. The UQQ-3.3/25-Q12N-C is a specific type of DC DC converter, and it is used in a variety of applications with the primary purpose of providing the right voltage output and power for the device or system being connected to it.
The UQQ-3.3/25-Q12N-C is a DC/DC buck-boost converter that operates from a 12V input to provide a 3.3V output at a maximum of 25 watts. It features high-efficiency, low-ripple output, and a wide operating temperature range of -40°C to +85°C. It is typically used in automotive, industrial, medical, and commercial applications where a reliable, efficient, and cost-effective DC/DC solution is needed.
The UQQ-3.3/25-Q12N-C has two primary components: an inductor and a switch. The inductor stores and releases energy to the load while the switch selectively turns on and off to change the flow of current. When the switch is turned on, current flows from the input to the inductor. When the switch is turned off, the inductor stores energy in its magnetic field while the load still receives power from the stored energy.
The UQQ-3.3/25-Q12N-C features programmable switching frequency and synchronous rectification. This allows the converter to provide higher efficiency, better power-to-size ratio, and fewer external components. It also uses a wide-input range design that enables the converter to operate over a wider input voltage range as compared to a standard voltage regulator. This allows for control of the output voltage over a wide range of input conditions.
The UQQ-3.3/25-Q12N-C also features over-voltage protection, short-circuit protection, under-voltage protection, over-temperature protection, reverse-current protection, input current limit, and current limit. These safeguards are designed to protect the converter from damage due to over-voltage, over-current, short circuits, or temperature fluctuations.
The UQQ-3.3/25-Q12N-C is an advanced DC/DC converter that is designed to provide a reliable and efficient source of power for a variety of applications. Its wide range of features, including programmable switching frequencies, synchronous rectification, and over-voltage protection, work together to ensure that the output voltage is always the right level and that the converter is always operating at peak efficiency.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...