UWE-12/6-Q48P-C

Series:	UWE
Packaging:	Tray
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	18V
Voltage - Input (Max):	75V
Voltage - Output 1:	12V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	6A
Power (Watts):	72W
Voltage - Isolation:	2.25kV
Applications:	ITE (Commercial)
Features:	Remote On/Off, OCP, OTP, OVP, SCP, UVLO
Operating Temperature:	-40°C ~ 85°C
Efficiency:	91%
Mounting Type:	Through Hole
Package / Case:	8-DIP Module, 1/8 Brick
Size / Dimension:	2.30" L x 0.90" W x 0.34" H (58.4mm x 22.9mm x 8.6mm)
Control Features:	Enable, Active High

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are an essential piece of technology in many industries that generally involve the transfer of power between two DC circuits. In many instances, a circuit includes a step-up converter, DC-DC converter, or power supply, and a UWE-12/6-Q48P-C converter is a very common type of converter used in such applications. This article will discuss the application field of a UWE-12/6-Q48P-C and its working principle.

The UWE-12/6-Q48P-C converter is an analog type converter, meaning it converts direct current (DC) from one voltage level to another. This is typically done by taking the power supply voltage from a lower DC level up to a higher DC level. The UWE-12/6-Q48P-C can also be used to step down voltage from a higher DC level to a lower one, or to provide DC isolation between an AC source and a DC output.

The UWE-12/6-Q48P-C converter has a wide range of applications due to its high efficiency and versatility. It is commonly found in electric vehicle systems, consumer electronics, medical instruments, industrial automation, telecommunications, automotive electronics, and home automation systems. The UWE-12/6-Q48P-C has also been used in renewable energy generation, power tools, and robotics.

The UWE-12/6-Q48P-C operates on the principle of using two transistors (MOSFETS) to regulate the current flow between the input and output circuits. The input voltage is applied to the gate of the first MOSFET, causing the second MOSFET to open and close in a controlled manner, forming switched-mode power supplies. The two transistors regulate the current flow, and the output voltage is controlled by changing the duty cycle of the switching.

The UWE-12/6-Q48P-C also uses a modulation technique called Pulse Width Modulation (PWM) to regulate the voltage output of the device. The PWM technique works by turning the switch on and off at a certain frequency with different duty cycles to allow a specific voltage output. This type of modulation is often used in high efficiency devices such as the UWE-12/6-Q48P-C.

The UWE-12/6-Q48P-C is an efficient, versatile, and reliable DC-DC converter that can be used for a wide range of applications. Its main advantages are its high efficiency, the ability to regulate current and output voltage, and its cost-effectiveness. The UWE-12/6-Q48P-C is widely used in various industries and applications, and is a great choice for any number of power supply requirements.

The specific data is subject to PDF, and the above content is for reference