UWQ-12/20-T48NS-C

Series:	UWQ
Packaging:	Tray
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	18V
Voltage - Input (Max):	60V
Voltage - Output 1:	12V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	20A
Power (Watts):	240W
Voltage - Isolation:	2.25kV
Applications:	ITE (Commercial)
Features:	Remote On/Off, OCP, OTP, OVP, SCP, UVLO
Operating Temperature:	-40°C ~ 85°C
Efficiency:	92%
Mounting Type:	Through Hole
Package / Case:	8-DIP Module, 5 Leads, 1/4 Brick
Size / Dimension:	2.30" L x 1.45" W x 0.46" H (58.4mm x 36.8mm x 11.7mm)
Control Features:	Enable, Active Low

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC–DC converters are used to convert a source of direct current (DC) from one voltage level to another. The UWQ-12/20-T48NS-C is a DC– DC converter module designed for use in battery-powered or other electrical systems that require a regulated DC voltage level. This article will discuss the application field and working principle of the UWQ-12/20-T48NS-C.

Application Field

The UWQ-12/20-T48NS-C is designed for applications that require a regulated DC voltage. It has two inputs: a primary DC voltage input and a secondary DC voltage input. The primary DC voltage input range is 12 to 20 volts, while the secondary DC voltage input range is 5 to 48 volts. The output voltage of the converter is regulated at the input voltage and can be adjusted up to ± 15%.The UWQ-12/20-T48NS-C is suitable for use in a wide variety of applications that require a regulated DC voltage. It can be used in industrial and consumer electronic products, medical devices, aerospace and defense systems, and other applications that require reliable and efficient regulation of DC voltage.

Working Principle

The UWQ-12/20-T48NS-C works by using a switching regulator circuit. This circuit is comprised of a primary power source, a switching transistor, an inductor, a diode, and a voltage regulator. When the primary power source is activated, the switching transistor will turn on and off, allowing the input voltage to flow through the inductor. As the voltage passes through the inductor, it stores and releases energy in a controlled manner, which produces a current output. The current output passes through the diode, which acts as a rectifier to convert the alternating current into a direct current. The direct current then passes through the voltage regulator, which ensures that the output voltage remains constant regardless of any changes in the input voltage.

Conclusion

The UWQ-12/20-T48NS-C is a DC–DC converter designed for applications that require a reliable and efficient regulated DC voltage. This converter works by using a switching regulator circuit that converts an input voltage into a regulated output. It is suited for a wide variety of applications, including industrial and consumer electronics, medical devices, aerospace and defense systems, and more.

The specific data is subject to PDF, and the above content is for reference