V150B5C150BS

Current - Output (Max):	30A
Base Part Number:	V150B5C150
Size / Dimension:	2.28" L x 2.20" W x 0.50" H (57.9mm x 55.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	85.8%
Operating Temperature:	-20°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	MINI
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	200V
Voltage - Input (Min):	100V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The concept of DC to DC converters is the basis of many current electrical and electronics applications. One specific class of converters are referred to as V150B5C150BS. This type of converter is capable of converting a high voltage direct current (DC) input into a much lower voltage DC output – commonly referred to as step-down or buck topology. The V150B5C150BS DC to DC converter is used in a wide range of power management applications, from automotive to consumer electronics. It is specially designed with industry-leading features, such as low power dissipation, an advanced built-in circuit protection system, and a built-in voltage measurement function. Additionally, it is configurable and supports a wide variety of input sources such as solar panels and battery banks.To understand how the V150B5C150BS works, it is important to understand the basics of a DC-to-DC converter. The basic components of a DC-to-DC converter are an input rectifier (or converter), regulator, and transformer. The input rectifier converts the input AC voltage into a DC voltage. The regulator then converts this DC voltage into a regulated DC voltage using a power switch to control the amount of current drawn from the power source. Finally, the transformer reduces the voltage and sends the converted voltage to the output.The V150B5C150BS DC to DC converter has all the features of a typical DC to DC converter. It is a step-down converter meaning that the output voltage is less than the input voltage. It is configured for a maximum input voltage of 150V and a maximum output voltage of 5V.In order to use the V150B5C150BS, the user must specify the input voltage, output voltage, and current output limit they will need in their application. Once configured, the user can then connect the power source to the input and its load to the output. When the power is connected, the V150B5C150BS will take the input voltage and convert it to the desired output.The V150B5C150BS can also be used to power circuits such as voltage sensors. This requires knowing the minimum and maximum operating voltage levels for the circuit. A voltage sensor is a device that detects the voltage of an input signal and provides an output signal with a defined voltage level. By using a V150B5C150BS, the user can configure the input voltage such that it meets the requirements of the voltage sensor. The user can then connect the voltage sensor’s output to the output of the V150B5C150BS to power the circuit.The V150B5C150BS DC to DC converter is a great solution for many applications. It is a cost effective, reliable, and efficient solution. It is capable of providing output voltages that meet the requirements of the circuitry being powered, and its built-in features provide optimal performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description