V150C36M150B3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters are used for converting power from one DC source to another. One of the most commonly used is the V150C36M150B3 DC-DC Converter. This is a high efficiency, low noise, high voltage DC-DC Converter that is specifically designed for use in distributed power supply systems.

Application Field

The V150C36M150B3 DC-DC Converter is typically used in distributed power supplies, such as in mobile applications. Its high voltage and low power draw make it perfect for a range of applications, such as in communication equipment, portable consumer electronics, and in the automotive industry. It can also be used in transit and transportation systems, with its small size and high efficiency providing a cost-effective solution for powering these systems.

Working Principle

The V150C36M150B3 DC-DC Converter is based on a buck topology. It is designed to operate at an input voltage range of 36 to 150 volts and deliver an output voltage of 3 volts. This is accomplished through the use of an inductor, an output diode, an output capacitor, and an internal switch. The inductor stores energy when the input voltage is higher than the output voltage. When the input voltage drops below the output voltage, the inductor releases energy and the output diode conducts to provide the output voltage.

The V150C36M150B3 DC-DC Converter also features a soft-start circuit, which minimizes peak current when the input power is turned on. This helps to reduce the risk of failure by reducing the possibility of overloading the power supply. Additionally, the buck topology in which the converter operates provides a smooth output voltage over a wide range of input voltage.

The V150C36M150B3 DC-DC Converter also has built-in short-circuit protection. This helps to protect against current overloads, which can cause damage to the power supply. In addition, it also has input-to-output voltage isolation, which helps to protect against electrical noise and interference from connected devices.

Key Features

The V150C36M150B3 DC-DC Converter is a feature-rich device. It has a high efficiency of 94%, a high power density of 1.5W/in3, and a small size of 2.5” x 2.25” x 0.8”. Additionally, it has a wide operating temperature range of -20°C to +85°C and a built-in thermal shutdown circuit to prevent damage from thermal overloading. It also features an adjustable output voltage of 2.5-3.6V, an adjustable switching frequency of 200-500kHz, and a low output ripple of 0.2% peak-to-peak.

Conclusion

The V150C36M150B3 DC-DC Converter is a feature-rich device that is designed for use in distributed power supply systems. Its small size, high efficiency, and high power density make it ideal for a range of applications, including communication, transportation, and consumer electronics. With its built-in features such as short-circuit protection and thermal shutdown, it is a reliable and robust solution for powering a wide range of devices.

The specific data is subject to PDF, and the above content is for reference