V150C3V3M75BN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are used to convert an input DC voltage into a different output voltage, usually with a lower output voltage than the input. This makes them versatile and very popular in both consumer and industrial applications, as they can be used to step up a low input voltage to a higher level, or step down a higher voltage. The V150C3V3M75BN is a modern example of a DC-DC converter.

Applications

The V150C3V3M75BN is an advanced, wide input range, DC-DC converter with extremely low output ripple and noise. It is primarily used for 3.3V stand-alone microprocessor applications. It is also used for 5V bus applications and controlled by external auto-control pins.

Typical applications for this device include embedded systems, industrial computers, medical diagnostic equipment, and industrial instrumentation. In addition, the V150C3V3M75BN is used for advanced vehicle applications such as motor control systems, radar detection systems, and advanced driver-assistance systems.

Working Principle

The V150C3V3M75BN operates based on the principle of voltage conversion. It takes a wide input voltage range in DC (7-72V) and provides outputs of 3.3V, 5V, or 3.3/5V with +/-10% accuracy. The device uses a regulated switch-mode converter with current-mode control and wide bandwidth features.

The device works by first rectifying and filtering the input voltage to create a steady, DC voltage. This voltage is then used to power the switching circuit, which controls the devices output voltage. The switching circuit consists of active components such as MOSFETs, which pulse at a very high frequency. When these pulses occur, inductor and capacitor components present at the output are charged and discharged, converting the steady DC input voltage into an output voltage.

The output of the V150C3V3M75BN is regulated by means of a feedback circuit and PWM control of the internal switching elements. The feedback loop compares the output voltage to a reference voltage, and the PWM control adjusts the duty cycle of the pulses based on the comparison result. This ensures that the output voltage is always as close as possible to the desired value.

Conclusion

The V150C3V3M75BN is a versatile, high performance DC-DC converter used in a variety of applications. It takes an input voltage of 7-72V and provides an output voltage of 3.3V, 5V, or a combination of 3.3/5V with +/-10% accuracy. The device uses a regulated switch-mode converter with a current-mode control circuit and wide bandwidth features to achieve its output.

The specific data is subject to PDF, and the above content is for reference