V20H140P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

"V20H140P" is a term that is commonly used in the electronics industry. It refers to a type of varistor, or voltage-dependent resistor, which is used to protect electrical circuits. Varistors, also known as voltage-dependent resistors (VDRs), are essentially a device that changes its resistance based on the voltage applied to it. Varistors are used in a variety of applications to provide voltage protection, from preventing short-circuiting in circuit boards to protecting components from power surges. They are often used in appliances, such as televisions and computers, where they are responsible for limiting the voltage that can pass through the circuit.

The V20H140P is a varistor that is used to protect sensitive electronic components. It is designed to limit current by absorbing a high-voltage surge. It works by detecting when the voltage is too high and then quickly switching to an open state. This prevents the current from continuing to flow at the higher voltage level, which could otherwise damage sensitive components. In addition, the varistor can withstand up to 1000 volts in excess of the rated voltage.

The V20H140P is generally used with two common technologies: metal oxide varistors (MOVs) and thermally activated varistors (TAVs). MOVs are made from a combination of zinc oxide and a metal oxide, such as aluminum or nickel. When an electrical current passes through the MOV, some of the metal oxide reacts with the zinc oxide and creates a resistance. This resistance prevents the current from flowing at a higher voltage, thus protecting the delicate components from electrical damage. TAVs, on the other hand, are made of a material such as polyethylene, which becomes resistive when heated. The resistive material then restricts the current from flowing at a higher voltage level.

The V20H140P is an important device for protecting sensitive components in electronic circuits. It works by detecting when the voltage is too high and then quickly switching to an open state, which prevents the current from passing at the higher voltage. The varistor can withstand up to 1000 volts in excess of the rated voltage, allowing it to protect components from any dangerous surges. In addition, it is typically used with either metal oxide varistors or thermally activated varistors, depending on the application. Regardless of the type of varistor used, the V20H140P ensures that current does not flow at higher than the rated voltage, thus protecting delicate components from damage.

The specific data is subject to PDF, and the above content is for reference