Current - Output (Max):	8.33A
Size / Dimension:	4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88.3%
Operating Temperature:	-40°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	300W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	36V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

)

Introduction to DC DC Converters

DC-DC converters are electronic circuits that convert one voltage level to another, both higher and lower. They are widely employed in industrial applications and consumer-electronic products. They are available in a variety of configurations, each providing different features and benefits. The selection of a converter depends on its function requirements and the application other characteristics, such as efficiency, size, weight, power, and frequency.

V24A36T300B3 application field and working principle

The V24A36T300B3 DC-DC converter is an excellent choice for many industrial applications. The V24A36T300B3 DC-DC converter has a wide input voltage range from 18-40V, and it offers regulated output voltages of 12V±5%, 24V±5%, and 36V±5%. The power output of the V24A36T300B3 is 300W, which is more than enough for most applications.The working principle of the V24A36T300B3 is based on switch-mode power conversion. The converter uses a high-frequency switching circuit to convert the input voltage to the desired output voltage. The efficiency of this type of converter is typically higher than linear converters. The main components of the V24A36T300B3 DC-DC converter are: the primary side MOSFET, secondary side MOSFET, and a control chip.The MOSFETs act as switches that open and close at a high frequency, which allows for the transfer of power between the input and output. The switching frequency of the V24A36T300B3 is 50-200kHz, which allows for a high efficiency of up to 96%. The MOSFETs also provide over-voltage and over-current protection, which helps prevent costly damage to the circuit.The control chip is responsible for controlling the frequency and duty cycle of the switching circuit. It also helps regulate the output voltage by sensing the voltage at the output, and activating or deactivating the MOSFETs accordingly. The control chip also provides a wide variety of safety features, such as thermal shutdown, over-voltage protection, and short-circuit protection. The V24A36T300B3 converter is widely used in industrial and commercial applications due to its high efficiency, wide input voltage range, and safety features. It can be used to power a variety of devices, from computers and servers, to medical equipment and lighting systems.

Conclusion

The V24A36T300B3 DC-DC converter is an excellent choice for industrial and commercial applications. It has a wide input voltage range and provides regulated output voltages of 12V±5%, 24V±5%, and 36V±5%. It has a power output of 300W, which is more than enough for most applications. The V24A36T300B3 also has a high efficiency of up to 96% due to its switch-mode power conversion and high-frequency switching circuit. The control chip provides a variety of safety features, such as thermal shutdown, over-voltage protection, and short-circuit protection. It can be used to power a variety of devices, from computers and servers, to medical equipment and lighting systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description