V24A3V3E264BN

Current - Output (Max):	80A
Base Part Number:	V24A3V3E264
Size / Dimension:	4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	78.5%
Operating Temperature:	-10°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	264W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	3.3V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices used to convert direct current (DC) from one voltage level to another. The V24A3V3E264BN converter is one such device. It operates on a single-phase input voltage and can deliver up to 3A of output current.The V24A3V3E264BN is designed for applications where step-down or step-up voltage conversions are required. For example, it can be used to convert 24V DC to a 3.3V DC output voltage. This type of converter is especially useful in industrial systems where the precise control of output voltage and current is essential.The V24A3V3E264BN is a type of isolated DC-DC converter known as a switch-mode power supply (SMPS). It utilizes a power stage that consists of a transistor switch, an inductor, and a diode. The switch is used to periodically connect and disconnect the input power source to the output load. The inductor will store energy during the periods when the switch is closed. When the switch is opened, the diode will allow the stored energy in the inductor to be discharged into the output load.The converter\'s circuit is designed to regulate the output voltage and current. It features a voltage regulation system which uses a voltage feedback control loop. A voltage divider is used to determine the output voltage which is compared to a fixed voltage reference. The difference between the two voltages is then used to generate a control signal for the switch. This signal determines when the switch is turned on and off so that the voltage regulation system can stabilize the output voltage to the desired level.The V24A3V3E264BN converter is also equipped with current limiting and over-voltage protection. The current limitation is done by driving the switch with a variable duty cycle. The duty cycle can be decreased if the output current is too high, thus limiting the output current. Over-voltage protection is implemented by monitoring the output voltage and turning off the switch if the voltage is higher than the set limit.Overall, the V24A3V3E264BN is a high-performance DC-DC converter that offers precise voltage regulation and current limiting, as well as over-voltage protection. It is a versatile device that can be used for a variety of applications, from industrial systems to consumer electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description