V24A3V3M264BL3

Current - Output (Max):	80A
Size / Dimension:	4.60" L x 2.20" W x 0.62" H (116.8mm x 55.9mm x 15.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	78.5%
Operating Temperature:	-55°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	264W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	3.3V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to DC DC Converters

DC-DC converters are widely used in the electronic industry and play an important role in energy conversion. They can be used to convert direct current (DC) power from one voltage level to another, and can also be used to provide various types of isolation between the input and output circuits. When a source of voltage is not isolated from the output circuit, It is known as a linear converter. Linear converters are commonly used in battery chargers, AC-DC power supplies, and power distribution systems. A switching converter, on the other hand, uses an electronic switch to change the voltage level. Switching converters are much more efficient than their linear counterparts, and are therefore the preferred choice for applications such as notebook computers, radio-controlled devices, and high-power dc motor drives.In order to understand the application field and working principle of the V24A3V3M264BL3 DC-DC converter, it is important to understand the different types of converters available on the market.

Types of DC-DC Converters

The most common types of DC-DC converters are step-up and step-down converters, as well as their variations. Step-up converters are used to increase the input voltage, while step-down converters are used to reduce the input voltage. In a step-up converter, the output voltage is higher than the input voltage. This type of converter is typically used to power higher voltage devices such as notebook computers or other portable electronics. In a step-down converter, the output voltage is lower than the input voltage. This type of converter is commonly used in automotive applications, as well as in solar power systems. There are also other types of converters, such as isolated converters and switched capacitor converters.

Working Principle of the V24A3V3M264BL3 DC-DC Converter

The V24A3V3M264BL3 is a step-down DC-DC converter that operates off a 24V input voltage and outputs a fixed 3.3V output voltage. The converter is designed to be used in automotive applications, as well as in power distribution systems. The converter utilizes a PWM (Pulse Width Modulation) control scheme to achieve its desired output voltage. In this type of control scheme, the power switch is controlled by a pulse signal with variable duty cycle. The duty cycle of the pulse is used to regulate the output voltage of the converter.The converter also utilizes a switch mode of operation, which helps to reduce the power losses and improve the overall efficiency of the converter. The switch mode is achieved by utilizing a high-frequency switching scheme in which the switching frequency is reduced when the load current is increased. This helps to reduce the amount of power dissipated in the power switch, which increases the efficiency of the converter.

Conclusion

The V24A3V3M264BL3 DC-DC converter is a great choice for a wide variety of applications, including automotive, power distribution, battery chargers, and other portable electronics. It is designed to operate with a 24V input voltage and a fixed 3.3V output voltage, and utilizes the efficient PWM control scheme and switch mode operation to reduce power loss and maximize efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description