V24A3V3T200BN

DC-DC converters are the heart of many of today’s power systems. They offer a flexible way to convert direct current (DC) to a higher or lower voltage to meet the requirements of various device applications. The V24A3V3T200BN is one such DC–DC converter and is designed to provide an easy means of converting a regulated 24V DC battery supply to a 3.3V output. This converter is particularly well suited for applications where only low voltage, high power is required, such as for automotive, industrial, and mobile RF devices.

The V24A3V3T200BN is based on a buck switching topology, with the system employing high frequency pulsed switching to convert the DC input voltage and inductor-capacitor filter circuits to produce a regulated output voltage. The converter has a power rating of up to 200 W and is fully protected against output shorts, over-voltage, under-voltage, and over-temperature. It also features a temperature compensated current limit, which ensures that the output current is stable over a wide temperature range.

The setting of the V24A3V3T200BN’s output voltage is determined by the resistor divider network connected to the converter’s feedback pins. The resistor divider network is configured so that its output voltage is a fraction of the output voltage of the converter, and the divider setting is adjusted to fine-tune the regulator output voltage. In addition, the converter features an enable input pin that allows for remote control of the output voltage.

The V24A3V3T200BN’s switching frequency is determined by a resistor connected between the converter’s FS (fixed frequency) pin and ground. The switching frequency can be adjusted by changing the value of the resistor, allowing for an optimized design to minimize system noise and power-component size. The converter also features an overtemperature protection circuit that limits the maximum junction temperature and shuts down the converter if the temperature exceeds a preset limit.

The V24A3V3T200BN DC-DC converter is a highly efficient and reliable choice for deploying low voltage, high power electronics in a wide range of applications. Its excellent efficiency and power density make it ideal for applications such as industrial, automotive, and mobile RF systems. It can be operated over a wide input voltage range with minimal output noise, making it an ideal choice for powering sensitive electronics such as RF amplifiers and sensors. The on-board enable pin allows easy remote control of the converter, allowing for flexible system designs. The fixed frequency switching allows the use of small external components to minimize converter size and system cost, and the built-in protection circuit ensures reliable operation. With its low cost and high reliability, the V24A3V3T200BN is a great choice for powering a variety of low voltage, high power electronics.