V24B28C250BS

Series:	MINI
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	18V
Voltage - Input (Max):	36V
Voltage - Output 1:	28V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	8.9A
Power (Watts):	250W
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Features:	OVP, UVLO
Operating Temperature:	-20°C ~ 100°C
Efficiency:	88.7%
Mounting Type:	Through Hole
Package / Case:	9-DIP Module
Size / Dimension:	2.28" L x 2.20" W x 0.50" H (57.9mm x 55.9mm x 12.7mm)
Base Part Number:	V24B28C250

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are electrical devices designed to convert DC power from one voltage level to another voltage level. The V24B28C250BS converter is an example of such a device, used for a wide variety of applications, including supplying dc to radio frequency circuits, powering computers, and more. The following section will discuss the application scope and working principle of the V24B28C250BS converter.

Application Scope

The V24B28C250BS converter is a high efficiency, compact DC-DC converter, capable of producing up to 250 Watts of output power. It has a wide input voltage range of 18 to 36 volts, and a wide output voltage range of 8 to 28 volts. Its efficiency is up to 90%, and its maximum power transfer efficiency is up to 98%. The V24B28C250BS converter can be used in applications that require a high density, high efficiency power supply. It can be used for a variety of applications in areas such as broadcast, telecom, industrial, military, and medical. It is suitable for use with sources such as grid power, portable power supplies, photovoltaic panels, generators, and intermediate bus converters.

Working Principle

The V24B28C250BS converter operates on a basic buck-boost conversion principle. When the input voltage is higher than the output voltage, the converter boosts the output voltage while converting the input power into energy at the desired output voltage level. When the input voltage is lower than the output voltage, the converter buck-boosts the output voltage, reducing the input voltage to the desired output voltage. In either case, the converter uses a switching power stage to regulate the desired output voltage.The voltage regulation of the V24B28C250BS converter is achieved using a pulse width modulation (PWM) technique. A feedback circuit monitors the output voltage of the converter and sends a signal back to the PWM controller, which compares the actual output voltage to the desired voltage. The PWM controller then sends a signal to the switching circuit to adjust the voltage level to the desired level.The V24B28C250BS converter provides a high level of protection against short circuits, thermal overloads, and overvoltages. When a fault is detected, the circuit will shut down, protecting the connected equipment and preventing damage to the converter.

The V24B28C250BS converter is a versatile DC-DC converter, suitable for use in a wide range of applications. Its wide input voltage range, high efficiency, and protection features make it an ideal choice for powering sensitive electronic equipment. It is a reliable and efficient power source that can serve many applications requiring DC power.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description