V24C48M100B

Current - Output (Max):	2.08A
Base Part Number:	V24C48M100
Size / Dimension:	2.28" L x 1.45" W x 0.54" H (57.9mm x 36.8mm x 13.7mm)
Package / Case:	Quarter Brick
Mounting Type:	Through Hole
Efficiency:	87.7%
Operating Temperature:	-55°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	MICRO
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to V24C48M100B DC/DC ConvertersDC/DC converters are electronic devices designed to convert Direct Current (DC) power from one voltage to another while maintaining the same frequency. The DC/DC converter is applicable to various power ranges, and can be used for both linear and switching applications. The V24C48M100B is a DC/DC converter manufactured by V24C48M100B LLC, and is suitable for applications in various industries and markets.V24C48M100B Application FieldsThe V24C48M100B DC/DC converter is suitable for a variety of industrial and applications, as well as for industrial and commercial markets. It is used widely in routers, switches, servers, storage systems, Ethernet networks, surveillance systems, vehicle systems, satellite systems, UPS systems, and POS terminals.Input Voltage for the V24C48M100B DC/DC ConverterThe V24C48M100B DC/DC converter accepts input voltages of 24V (±10%), 48V (±10%), and 100V (±2.5%) from a source with a maximum of 200A maximum current.Output Voltage of the V24C48M100B DC/DC ConverterThe output voltage of the V24C48M100B DC/DC converter can be set to any value between 1.5V and 100V. Additionally, the output voltage can be adjusted in small increments with a pulse width modulation system.Efficiency of the V24C48M100B DC/DC ConverterThe V24C48M100B DC/DC converter has an efficiency ranging from 88% to 99% depending on the load conditions and the voltage level. This helps to reduce energy loss and lower operating costs.Protection of the V24C48M100B DC/DC ConverterThe V24C48M100B DC/DC converter is designed with built-in safety features to protect it from damage due to overload, short circuit, over temperature, and under voltage. Additionally, it has an over current protection system to ensure maximum safety and reliability.Environmental Conditions of the V24C48M100B DC/DC ConverterThe V24C48M100B DC/DC converter is designed to work in a wide temperature range from -40°C to + 85°C, with a relative humidity of 5-95%. It is also resistant to corrosion, shocks, and vibrations.Standard Approvals of the V24C48M100B DC/DC ConverterThe V24C48M100B DC/DC converter has been tested to many safety standards, such as UL, CE, and RoHS, and is approved by the FDA. It also meets the minimum safety requirements of the Japanese industrial standards.Working Principle of the V24C48M100B DC/DC ConverterThe V24C48M100B DC/DC converter utilizes a switching technique to convert the input voltage to a desired output voltage. When a higher voltage is needed, the V24C48M100B DC/DC converter will switch the input voltage to a lower one. Conversely, when a lower voltage is desired, the DC/DC converter will switch the input voltage to a higher one, so that it can reach the correct output.Additionally, the V24C48M100B DC/DC converter is designed with a two-stage conversion process. In the first stage, the voltage is regulated by a pulse width modulation (PWM) circuit, which adjusts the duty cycle of the pulse according to the target voltage. In the second stage, a DC/DC power converter is used to further fine-tune the output voltage.ConclusionThe V24C48M100B DC/DC converter is an efficient and reliable device that can be used in a variety of applications. It is designed with built-in safety features, and has been tested and approved to the highest standards. Additionally, it functions using a switching technique and a two-stage conversion process, allowing it to fine-tune the output voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description