V28A36C200BN2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters, one of the primary types of power electronics, are integral to power systems today. These devices convert direct current, or DC, from one voltage level to another, usually from a higher voltage to a lower voltage. The V28A36C200BN2 is a DC-DC Converter, specifically a 75 watt low-profile module. It accepts inputs from 28 to 36 volts DC and provides regulated outputs of 5 volts DC at up to 20 Amps.

This makes the V28A36C200BN2 an ideal power supply for a range of systems, from 25 Watt as well 45 Watt CPUs and GPUs to small multimedia platforms such as the Com Express form factor that need an input voltage of 5 volts DC. The V28A36C200BN2 is a high-performance solution for rugged outdoor conditions. It has a very high efficiency level and is small in size, making it versatile and compact enough to fit in small and tight spaces.

The main components in the V28A36C200BN2 are two high-frequency switching MOSFETs, two rectifiers and an inductor. The MOSFETs enable the switching of voltage between the input and the output sides of the device. The rectifiers are responsible for the conversion of direct current (DC) to alternating current (AC) and also the conversion of AC to DC. The inductor stores the current and thus acts as a buffer. The switching MOSFETs, rectifiers and the inductor form what is known as a DC-DC Buck converter topology.

The working principle behind the V28A36C200BN2 DC-DC Converter is fairly simple. It works by taking the existing DC voltage on the input side and converting it to a lower voltage on the output side, without compromising on the efficiency. It does this by filtering and controlling the energy losses through the use of the switching MOSFETs, rectifiers and the inductor. The conversion is achieved by converting the direct current from the input side to an alternating current and controlling it through the use of the MOSFETs.

Once the current has been converted from DC to AC, the current is then switched by the MOSFETs, which are triggered by a Pulse Width Modulated (PWM) signal generated from the control system of the converter. The MOSFETs switch the current to the output side at a desired frequency, and then the rectifiers convert the current back to DC at the desired output voltage. Finally, the inductor acts as a buffer and stores the current to improve the overall efficiency of the system.

The V28A36C200BN2 DC-DC Converter is a highly efficient and reliable power solution for a range of applications. It provides regulated outputs of 5 volts DC at up to 20 Amps, making it ideal for applications such as 25 and 45 Watt CPUs and GPUs as well as small multimedia platforms. It is a compact and efficient solution that is perfect for outdoor applications and tight spaces. Its working principle of converting direct current into alternating current is straightforward and highly efficient.

The specific data is subject to PDF, and the above content is for reference